Work by Category

South-London-Tile-Doctor

Welcome to my Work History archive where you will find detailed examples of Tile, Grout and Stone Cleaning and Renovation work carried out through South-London.

To make things easier to find I have organised the posts by the most popular types of Tile and Stone. I also renovate other materials so if you’re looking for something else do get in touch as it’s highly likely we have the solution.

Popular requests include Ceramic Tile, Encaustic Cement, Fireplaces, Flagstone Pavers, Grout Cleaning, Limestone, Marble, Porcelain Tile, Quarry Tile, Sandstone, Slate, Terracotta Tile, Terrazzo Floors, Travertine, Victorian Flooring and Vinyl Floors.

Bathroom Floor Grout Restoration in Tooting SW17

Bathroom Floor Tile Grout Restoration in Tooting SW17

1 Comment / Ceramic Tile Cleaning, Clapham Tile Cleaning, Grout Cleaning, Wandsworth Tile Cleaning /

A client was renovating a house in Tooting and wanted to see what could be done to improve the Ceramic floor tiles in the bathroom without the expense of a major overhaul. Having discussed the floor over the phone I was confident it could be improved and agreed a date to come over and survey the tiles and provided a quote for their renovation.

Bathroom Floor Grout Before Restoration in Tooting SW17

Except for one cracked tile, the tiles were in good condition and I could see it was really the grout that was bringing the bathroom down. The grout was generally discoloured and some had cracked and become loose. This cracking issue is indicative of using an inflexible grout when tiling on a wooden floor as these floors tend to have a bit of movement in them.

I discussed my renovation plan with the customer and provided a quote for carrying out the work which was accepted.

Renovating Bathroom Floor Grout

On the first day I set about raking out the cracked grout and stripping out the silicone between the tile and the bath. Silicone seems to attract mould and although it can be cleaned to some extent, I usually find its more effective to simply replace it. I then tidied up the bathroom to remove the waste grout and silicone, so the area was ready for grouting. I used a flexible White grout for this in order to match the original, although most of that was no longer White due to the staining.

I left the grout to set overnight and returned the next day to complete the job starting with the re-application of the silicone sealant, again in White but this time using an anti-mould variety. My attention then turned to the floor tile grouting which of course was now a mixture of fresh new grout and stained grout. I had realised this would be the result, so I had come prepared and was ready to apply Tile Doctor Grout Colourant in white to make everything uniform.

Before applying the colourant, I prepped the grout joint with Tile Doctor Pre-treat cleaner that is an acidic cleaning solution that is sprayed onto the grout and then scrubbed in. This cleans the grout joints, and the acidic nature of the cleaner helps prepare the grout to achieve a better bond with the colourant. The grout was then wiped with a wet sponge to remove the dirt and then dried ready for the colourant. Although the cleaner had helped to clean the grout and remove surface dirt it can’t do anything about deep seated staining, so colouring was still necessary.

Once the grout was dry the White grout colourant was painted onto the grout using a small brush wiping off any excess from the tile as I went. The Tile Doctor range of Grout Colourants come in eleven different colours and form an epoxy barrier over the grout preventing dirt from reaching the grout line and making it much easier to keep clean.

Bathroom Floor Grout After Restoration in Tooting SW17

Once the colourant had dried, I gave the floor a quick clean with Tile Doctor Neutral Tile Cleaner to get the ceramic tiles clean and the job was complete. The refreshed grout now has a consistent white appearance, and it really lifted the appearance of the bathroom.

 

Professional Restoration of a Bathroom Floor Grout in South London

Bathroom Floor Tile Grout Restoration in Tooting SW17 Read More »

Porcelain Tile Bathroom Grout Cleaning Wandsworth

Porcelain Tiled Bathroom Grout Renovation in Wandsworth

1 Comment / Grout Cleaning, Porcelain Tile Cleaning, Wandsworth Tile Cleaning /

This is a great example of how easy it is to improve the appearance of a tiled bathroom. In this case the property was in Wandsworth and the tiles were Porcelain. My client had originally asked if I could re-grout their bathroom tiles which included the shower, wall and floor tiles in a room that was around 5sqm.

Porcelain Bathroom Tile Before Grout Renovation Wandsworth

We discussed the bathroom, and I pointed out that if we re-grout the tiles it would only get grubby again at some point. The problem is that the grout is cementitious which leaves it rough and attracts dirt easily. I recommended cleaning up the grout and then applying a grout colourant which would seal the grout in making it much easier to clean. I also offered to remove the silicone sealant between the edges of the bath and tiles. Unfortunately, once mould gets into the silicone, you’re fighting a losing battle, and it is best to just replace it.

Re grouting a Porcelain Tiled Bathroom Floor

Before colouring the grout, it needs to be prepared with an acidic cleaner that will not only remove any dirt but also etch the surface of the grout to improve the bond. Tile Doctor Pre-Treat Cleaner is the product we use for this purpose, but I decided in this case to go with a different product as the floor tiles had some old silicone on them which had been left to dry out. To resolve this, I used a different product in the range called Tile Doctor Grout Clean-Up which is primarily designed for removing grout haze.

Porcelain Bathroom Tile During Grout Renovation Wandsworth

It was only a small area, so I worked the Tile Doctor Grout Clean-Up into the tiles and grout by hand and then rinsed it off with water and extracted with a wet vacuum. The grout was then dried, and I started applying the Tile Doctor Grout Colourant in white with a small brush wiping off the excess as I went. The colourant is available in a range of eleven colours so there is usually a match for most situations. The colourant adds an epoxy barrier over the grout; this then prevents dirt from going into the grout line and means the floor is much easier to keep clean.

The last step in the renovation involved carefully stripping out the old silicone and replacing it with a new anti-mould variety. This last step really finished off the bathroom giving the impression it was a new installation.

My clients were very happy with the result, the bathroom was transformed, and they were relieved that the problem was solved so easily.

Porcelain Bathroom Tile After Grout Renovation Wandsworth

For aftercare cleaning I recommended regular use of Tile Doctor Neutral Tile Cleaner which is a mild yet effective tile and grout cleaning product that would help keep the bathroom looking good going forward.

 

Professional Restoration of a Porcelain Tiled Bathroom Grout in South London

Porcelain Tiled Bathroom Grout Renovation in Wandsworth Read More »

Acid Damaged Marble Tabletop Renovated in Putney

Restoring the Appearance of a Marble Coffee Tabletop in Putney

1 Comment / Marble Tile Cleaning /

The photographs below are from a client in Putney, and show what will happen to a Polished Marble tabletop if you try and clean it with Viakal. Marble is made from calcium and magnesium carbonate which makes it acid sensitive, Viakal on the other hand is an acid cleaner blended from Formic and Citric acids resulting in a pH level of 2.2. This product uses the acid to dissolve the calcium and magnesium deposits in Limescale.

Acid Etched Polished Marble Table Before Renovation Putney

To be fair to Viakal the label does state not to use it on natural stone, but who reads the label, certainly my clients cleaner hadn’t. The result was the acid had etched the lovely, polished Marble surface and it appeared to be ruined.

I was happy to re-assure my client that the etching could be removed, however, to do this the table would need to be burnished with a set of diamond pads of different grades. This process cuts into the stone with a coarse pad to remove the etching and then slowly builds back the polished appearance using finer grades of pad. The table was very heavy however so the work would need to be done on-site.

Polishing a Marble Tabletop

Due to the weight of the stone table, it couldn’t really be moved so my first job was to relocate nearby furniture, roll up the rug and cover everything in blankets and a drop cloth. The last thing I wanted was any other possessions getting splashed during the burnishing process.

When polishing Marble floor tiles, I would normally use large 17-inch diamond pads fitted to a rotary floor buffer, however that simply wouldn’t work on a table, so I ordered a set of 6-inch burnishing pads from Tile Doctor instead. These smaller pads fit nicely on a hand-held buffer that would be perfect for this situation.

The burnishing process involves working through the pads in sequence. I started with the coarse 100, 200 and then 400-grit pads applied with a little water, these coarse pads were able to remove the etching and ingrained dirt. The table was rinsed down and then the 800-grit medium pad was applied which is the first step in the polishing process. Again, this pad is applied with water to lubricate, and the table was rinsed down afterwards.

Acid Etched Polished Marble Table During Renovation Putney

The process was repeated with the 1500-grit fine pad and then the 3000-grit very fine pad to bring up a really nice shine to the Marble table, I should mention the last pad is applied dry with only a tiny amount of water sprayed onto the surface.

Sealing a Marble Table

The last step was to seal the stone to protect it going forward. I used Tile Doctor X-Tra Seal for this, it’s an oil-based impregnator and I figured the oil in the sealer would mask any marks that I wouldn’t be able to remove, however I actually ended up removing all the etching so the sealer just gave the stone a really nice colour and gloss.

Acid Etched Polished Marble Table After Renovation Putney

My customer was very pleased with the work and said that the table looked better than it ever had before. NB. For the aftercare cleaning of a polished Marble coffee table like this I recommend the use of Tile Doctor Stone Patina Spray which has been especially formulated for the regular cleaning of stone worktops.

 

Professional Restoration of a Marble Tabletop in South London

Restoring the Appearance of a Marble Coffee Tabletop in Putney Read More »

Shower Tile and Grout Cleaned and Renovated in Battersea Shower Cubicle

Ceramic Tiled Shower Cubicle Refreshed in Battersea

1 Comment / Battersea Tile Cleaning, Ceramic Tile Cleaning, Grout Cleaning /

I was contacted by a customer in Battersea who was concerned about the state of their Ceramic Tiled shower cubicle. Ceramic tiles are glazed so usually very easy to keep clean however grout has a rough surface and attracts dirt easily. Where this happens it best to keep on top of the problem with regular cleaning as once you get a deep-seated stain on grout it’s very difficult to get it clean again.

The photograph below shows the worst of the problem where dirt had collected behind a wire basket that was fixed to the wall. The basket allowed dirt to build-up behind it and had deposited rust on the tile and grout.

Ceramic Shower Before Tile Cleaning Battersea

Maintaining grout is a large part of the work Tile Doctor does and we have several tried and tested products and processes for doing this. Having spoken to the client over the phone and having been sent photographs via email I created a quote for the work which should only take a few hours. My customer was happy with the quote and we agreed a date to do the work.

Cleaning a Ceramic Tiled Shower Cubicle

To begin, I cleaned the grout lines using our acidic cleaning product, Tile Doctor Grout Clean-Up. The product is decanted into a spray bottle and sprayed onto the tile and grout where it was left to dwell for ten minutes before being scrubbed in with a handheld scrubbing brush. Spraying the solution onto the wall mixes it with air to make it lighter and more able to stick to the wall.

Being a concentrated phosphoric acid cleaner, Grout Clean-Up effectively removes mineral deposits including rust and old grout smears from the tile surface to leaving it looking much fresher, it also prepares the grout for a superior bond with the grout colourant that was to be added later.

Following this, I rinsed down the tile and grout with water to remove the dislodged dirt. The next step was to remove all the existing silicone mastic with a sharp knife; the mastic sealant stained with mould and much in need of replacement. Once all the rubbish was swept out, I dried any remaining dampness from the grout and tiles with a heat gun.

I then moved onto to recolouring the grout using a Tile Doctor Grout Colourant which is simply painted onto the grout lines using a small brush and any excess wiped of the tile before it dries. There are eleven colours available in the Tile Doctor colourant range and in this case, we chose a colour to match the tiles.

Ceramic Shower After Tile Cleaning Battersea

The application of Grout Colourant not only colours the grout joints – it also seals the grout in so dirt can’t become stuck in its rough surface, this also makes it very easy to clean going forward.

Once the restoration was finished, I resealed the shower base with fresh mould resistant silicone mastic to match the tile and grout. Tile Doctor don’t sell this but there are many makes available from local DIY stores.

 

Ceramic Tiled Shower Cubicle Cleaning and Grout Recolouring in South London

Ceramic Tiled Shower Cubicle Refreshed in Battersea Read More »

Black Slate Kitchen Floor Renovation Tooting

Black Slate Tiled Kitchen Floor Renovated in Tooting

1 Comment / Grout Cleaning, Slate Tile Cleaning, Wandsworth Tile Cleaning, Wimbledon Tile Cleaning /

The photos below are of a Black Slate Kitchen floor at a property in Tooting SW17, which as you can see had lost all its colour and character. I went over to survey the floor and discussed a renovation plan with the owner.

One of the problems was the grout which like the tile hadn’t faired very well over the years and being in the Kitchen was subject to staining. I explained that like all stone floors the Slate needed to be sealed in order to keep the dirt out of its pores and keep it looking its best. Sealers however wear down with use and in this case the floor hadn’t been deep cleaned and sealed for some time.

I costed out a renovation plan which included deep cleaning the Slate tile removing any remaining sealer in the process, renovating the grout, and then re-sealing the whole floor to bring back the appearance of the stone and protect it going forward. Happy with the quote we agreed a date to start the work.

Deep Cleaning a Natural Black Slate Tiled Kitchen Floor

Normally I would use a Tile Doctor product called Remove and Go to remove the sealer, however in this case testing had shown that what was left of the sealer could be removed with Pro-Clean which is also our go to Tile and Grout Cleaner.

I used a strong dilution of Pro-Clean to do this, spraying it onto the floor and leaving it to soak in for ten minutes and break down the dirt etc. Then using a black scrubbing pad fitted to a heavy rotary buffer machine it was worked into the Slate to release the dirt and old sealer. The floor was then rinsed with water and the soiling extracted with a wet vacuum.

The pads can struggle to get into the corners and edges of the floor and the recesses of the grout line. So, to complete the cleaning a handheld scrubbing brush was used and a wire brush run along the grout lines, again with more Tile Doctor Pro-Clean. After another rinse and extraction with the wet vacuum the floor was left to dry aided with a couple of floor blowers.

Grout Colouring and Sealing Black Slate Tiled Kitchen Floor

Once dry the grout was coloured with a Black Tile Doctor grout colourant which is basically painted onto the grout with a small brush and any excess wiped off the tile. This grout colourant gives the grout a uniform appearance and adds an impenetrable barrier over the grout sealing it in and keeping it safe from further staining. Keeping grout clean in a kitchen is always a problem so the colourant will protect it and make it very easy to clean.

Black Slate During Cleaning Grout Colouring Tooting

The last step was to seal the Slate for which I used Tile Doctor X-Tra Seal. This was chosen because it’s an impregnating oil-based sealer that will restore the beautiful dark colour in the stone. Impregnators work by occupying the tiny pores in the stone thereby forcing dirt to remain on the surface where they can easily be cleaned away.

Black Slate During Sealing Tooting

In the subject of maintenance cleaning, I recommend the use of Tile Doctor Neutral Tile Cleaner which is a gentle but effective cleaner that won’t harm the sealer. Many of the floor cleaning products you find in supermarkets etc are not for use on sealed stone, they contain strong chemicals such as bleach etc which will strip off the sealer prematurely so best avoided.

Black Slate After Renovation Tooting

 

Professional Renovation of Black Slate Tiled Kitchen Floor in South London

Black Slate Tiled Kitchen Floor Renovated in Tooting Read More »

Small Quarry Tiled Kitchen Floor Renovation Purley

30-Year-Old Laminate Floor Removed to Reveal Heavily Stained Quarry Tiles

1 Comment / Purley Tile Cleaning, Quarry Tile Cleaning /

The photos below are of a Quarry tiled floor situated in a small kitchen at a house in Purley. The quarry tiles were previously covered in laminate for about 30 years which had recently been removed. This left the floor in quite a state as you can see from the photograph below. The floor was stained with numerous deposits including paint and adhesive and some sort of wax covering which was all over the surface.

Small Quarry Tiled Kitchen Floor Before Renovation Purley

Cleaning a Quarry Tiled Kitchen Floor

Before cleaning I covered the entire kitchen in a drop cloth to protect the units from splashing, I normally remove the kick boards as part of this process however, in this case the bottom of the units were already siliconed to the tiles. This is good practice as otherwise the boards which are usually made of MDF can soak up the water used during cleaning and warp the boards.

Next, I tackled the staining, surface paint, adhesive and wax using a strong dilution of Tile Doctor Remove & Go combined with Tile Doctor Pro-Clean to make a double strength stripper and cleaner. This was applied to the tiles and grout, and then left to soak in for ten minutes. I used a floor scraper to dislodge the glue which had been softened by the solution and then removed using a wet vacuum. The next step was to scrub the floor with a carbide brush and a coarse 200-grit diamond pad using only water to lubricate the process.

Once this was done, I rinsed the floor with water and extracted the slurry with the wet vacuum and allowed it to dry.

Sealing a Quarry Tiled Kitchen Floor

Once the floor was dry, I returned to protect the tiles by applying Tile Doctor Colour Grow sealer. This is an impregnating sealer that works by soaking into the pores of the quarry tiles occupying the spaces within and thereby preventing dirt from becoming ingrained and making it much easier to clean. Tile Doctor Colour Grow also contains a colour enhancer that works well on Quarry tiles as it brings out the red colours in the tiles. Two coats of the sealer were applied allowing thirty minutes between coats.

I recommended the use of Tile Doctor Neutral Tile Cleaner for ongoing maintenance. This is a pH neutral product which is mild enough to use every day, gentle on the floor and will ensure the newly applied sealer will stay in place and the floor will continue to look great.

Small Quarry Tiled Kitchen Floor After Renovation Purley

The result was transformational, and it certainly impressed my customer who left the following 5 star feedback.

“Daniel and his team were amazing! Extremely professional, thorough, and undeniably delivered an excellent end result for my old and tired tiles. So impressed! I would most certainly use this service again. By Sarah, Purley, 12 June 2023”

 

Professional Renovation of a Quarry Tiled Kitchen in South London

30-Year-Old Laminate Floor Removed to Reveal Heavily Stained Quarry Tiles Read More »

Bathroom Floor Grout Cleaning Colouring Gipsy Hill

Bathroom Floor Tile Grout Renovated in Gipsy Hill SE19

1 Comment / Brixton Tile Cleaning, Ceramic Tile Cleaning, Grout Cleaning, Porcelain Tile Cleaning /

The Grout on this tiled floor in the bathroom of a property near Gipsy Hill SE19 was as you can see from the photo below in a bit of state. Originally White the colour of the grout had darkened to black in numerous areas and was bringing down the appearance of what was a lovely bathroom.

The floor tiles were Travertine effect Ceramic or Porcelain and as you would expect with tiles of this nature in very good condition. Ceramic and Porcelain tiles are not porous and so very easy to maintain, however what tends to happen is the dirt is washed off the tiles straight into the adjacent grout line where due to the rough nature of the grout it gets stuck.

Bathroom Floor Grout Before Cleaning Gipsy Hill

My renovation plan for tackling dirty grout is to start with a strong grout cleaner like Tile Doctor Pro-Clean and if the staining is still evident apply a Grout Colourant. I discussed this plan with owner of the property who were happy that one way or another the problem was about to be resolved.

Cleaning a Natural Black Ceramic Tiled Bathroom Floor

The first step in renovating this floor was to tackle the grout which was clearly the biggest issue with this floor. This work started by applying a strong dilution of Tile Doctor Pro-Clean along the grout lines and then waiting for about ten minutes before scrubbing it in with a wire brush. I also used a 6-inch Black scrubbing pad fitted to a hand-held polisher to clean the tiles which as mentioned earlier only needed a light clean. The floor was then rinsed with water and then dried with a wet vacuum to remove the excess water and slurry from the cleaning.

The grout responded well to the treatment but unfortunately the staining was simply too deeply seated to make it look new again so I decided to adopt plan B and apply a White Grout Colourant. These colourants have the added advantage of sealing in the grout and are very easy to clean.

The grout was force dried and then once I was happy it was dry enough, I started the process of applying the grout colourant to the grout lines. Grout Colouring is a straightforward and involves using a small brush to paint the colourant onto the grout and then wiping the excess off the tile as you go. We find a wet wipe works well for this. Two coats of Grout Colourant were applied.

Bathroom Floor Grout After Cleaning Colouring Gipsy Hill

Whilst that was drying, I stripped out the silicone sealant around the edges of the bathroom and replaced with new. This last step really finished off the transformation and it would have been obvious if I had missed it.

Once finished the floor looked like a new installation and the Grout Colourant should keep it looking that way for many years to come.

 

Professional Bathroom Floor Grout Cleaning and Colouring in South London

Bathroom Floor Tile Grout Renovated in Gipsy Hill SE19 Read More »

Natural Black Slate Bathroom Floor Tile Renovation Brixton

Black Slate Tiled Bathroom Floor Transformed in Brixton

1 Comment / Brixton Tile Cleaning, Grout Cleaning, Slate Tile Cleaning /

This bathroom floor at a property in Brixton was laid with natural Black Slate tiles around five years ago and then badly restored/cleaned three years ago. Some of the more noticeable problems included a build-up of limescale on top of old patchy grout paint and the sealant on the slate was failing allowing the tiles to absorb dirt. The result was a a very unappealing and grubby looking floor.

Natural Black Slate Bathroom Floor Tiles Before Cleaning Brixton

Unhappy with what could be a stunning Black Slate floor the owner contacted Tile Doctor and I was asked to visit the property, survey the tiles, and provide a quote for its renovation.

Cleaning a Natural Black Slate Tiled Bathroom Floor

To get the grout clean of dirt it was scrubbed with a stiff brush and a strong dilution of Tile Doctor Pro-Clean. The grout was then spot treated with Tile Doctor Grout Clean-Up to help remove the old grout paint and a ready mixed grout used to fill gaps where the grout had become dislodged.

Next, I addressed the slate tiles and applied Tile Doctor Remove and Go to remove what was left of the old sealer, the solution was left on the tiles for ten minutes and then agitated with a brush to dislodge the old sealer and dirt. The floor was then rinsed with water and the soil extracted with a wet vacuum.

Once done I could see more work was needed so a 200 grit 6-inch pad was fitted to a hand-held buffer and run over the tiles to further clean up the tiles along with a carbide brush to help reduce the lippage between the tiles. Once done the floor was rinsed and extracted again with water multiple times to ensure no trace of products was left on the Slate.

Sealing a Natural Black Slate Tiled Bathroom Floor

The floor was left for a few hours so it could dry and when dry sealed with two coats of Tile Doctor Colour Grow applied with a paint pad and cloth to add protection and to make the dark shades in the stone stand out.

To complete the look a Tile Doctor Black Grout Colourant was then applied to the grout lines so it would match the dark Slate better. The colourant has the added advantage of sealing in the grout and making it much easier to keep clean.

Natural Black Slate Bathroom Floor Tiles After Renovation Brixton

My client was very pleased with the transformation and left the following feedback for me which is always appreciated:

“Really excellent job from Daniel & team. My natural slate bathroom floor looks better than when it was first laid. Superb communication and finished job. I can’t recommend them enough. 5*”

The client has since asked us to come back to complete more works on the Limestone bathroom walls which of course we are happy to oblige!

For aftercare I recommended the use of Tile Doctor Neutral Tile Cleaner for the regular cleaning of tiles. This pH neutral product will keep the limescale at bay and eliminates the build-up of soap, it is mild enough to use every day and has a nice fresh smell.

 

Professional Renovation of Black Slate Tiled Bathroom Floor in South London

Black Slate Tiled Bathroom Floor Transformed in Brixton Read More »

Neglected Victorian Tiled Path Restoration Battersea

Restoring a Neglected Victorian Tiled Path in Battersea

1 Comment / Battersea Tile Cleaning, Victorian Tile Cleaning /

Here we have an old Victorian tiled path in front of a property in Battersea which was very much worse for wear. Tiled in a red and black diamond pattern it had seen a lot of use and weathering and the owner now wanted it renovating or improving at the very least.

Neglected Victorian Tiled Path Before Restoration Battersea

I was asked to pop over to the property, survey the path and provide a quote for its restoration. Hopefully you can appreciate from the photographs the numerous cracks and missing tiles. It was certainly going to need a lot of work to improve its appearance, which I was happy to do but I had to lower the expectations of the owner as it would never be perfect. We agreed a price for the work and booked the job in.

Neglected Victorian Tiled Path Before Restoration Battersea

Repairing a Victorian Tiled Pathway

Before starting work we tried to source salvaged tiles that would blend in with the originals, but unfortunately, we couldn’t find any that were a close enough match, so had to make do with modern tiles. These are still suitable but the metric sizing makes it a little tricker.

Work started by digging out the broken and loose tiles and then cleaning what could be salvaged. Once removed the base was then cleared of debris and where required rebuilt with cement. There were numerous affected areas, so it took quite some time to complete. Finally with the preparation done the tiles were re-laid using a mixture of original and new. The new tiles being metric had to be cut to shape as needed. The repair work was extensive and took two days to complete.

Neglected Victorian Tiled Path During Repair Battersea

Cleaning a Victorian Tiled Pathway

On day three the replaced tiles had set, and I was able to clean up the whole path by scrubbing in Tile Doctor Oxy-Gel which being a gel cleaner doesn’t require a lot of water. This was then followed by giving the path an acid rinse using Tile Doctor Acid Gel which further cleans the tiles and again being in gel format doesn’t require a lot of water and is much easier to control. After each stage in the cleaning process the soils were extracted with a wet vacuum.

I recommend the use of gel cleaners on old tiles like this example as they were laid before the invention of the damp proof membrane and less water means it dries quicker. This was important as it was planning to apply a sealer the next day and the tiles must be dry to achieve the best result.

Sealing a Victorian Tiled Pathway

The weather held out and after leaving the path to dry overnight I confirmed they were dry the next morning with a damp meter. Two coats of Tile Doctor Colour Grow sealer were applied to the tiles which is a fully breathable sealer that works by soaking into the tile, occupying the pores and thereby preventing dirt from becoming ingrained there. With the dirt forced to remain on the surface they are much easier to clean. This product also contains a colour enhancing formula which helps improve the deep Red and Black colours in the tile.

Neglected Victorian Tiled Path After Restoration Battersea

The tiles responded very well to the treatment and transformed the appearance of the path. Expecting only a small improvement my client was over them moon with the difference.

Neglected Victorian Tiled Path After Restoration Battersea

 

Professional Restoration of a Victorian Path in South London

Restoring a Neglected Victorian Tiled Path in Battersea Read More »

Victorian Tiled Hallway Floor Renovated Fulham

Restoration of an Unloved Victorian Tiled Hallway Floor in Fulham

1 Comment / Putney Tile Cleaning, Victorian Tile Cleaning /

I received a request to quote for the restoration of this Victorian tiled floor in the hallway of a property in Fulham which as you can see from the photographs was in a very poor condition.

Victorian Tiled Hallway Before Cleaning Fulham

I visited the property to survey the floor and could see that except for a few loose tiles it was in good physical condition. From experience I knew it would respond well to a deep clean and seal so I carried out a test clean on a small area to demonstrate its potential. The tiles came up well and my client was satisfied it would be worthwhile to have it restored.

Victorian Tiled Hallway Before Cleaning Fulham Victorian Tiled Hallway Before Cleaning Fulham

When you have period features such as this floor in a property it is a shame not to make the most of them, they are sought after and will increase its value. Having agreed my quote, we arranged to carry out the work the following week.

Cleaning a Victorian Tiled Hallway Floor

To get all the dirt out of the pores of the tiles I first applied a strong dilution of Tile Doctor Remove and Go and after leaving it to soak in for ten minutes was scrubbed in with a black pad. I also used a steam cleaner during this process to help lift the dirt out of the pores. From what I could tell the tiles had a variety of contaminants including paint, plaster, cement, and dirt. Luckily Tile Doctor Remove and Go can handle all of these. I had to repeat the process on the stubborn stains and then removed all the slurry and dirt using a wet vacuum.

I then moved onto the loose tiles which needed to have the old adhesive removed from the tile and the base. The original tiles were then cleaned up by hand before new rapid setting adhesive was applied to secure them back into the floor.

Once the loose tiles had set, I moved onto the next step of giving the floor an Acid Rinse using Tile Doctor Acid Gel. This cleans up the tiles further by removing old grout smears and dissolving efflorescent salts in the floor. This is a common in properties of this age which don’t have a damp proof membrane to stop moisture rising through the tile. This process also neutralises the pH level of the floor after the use of strong alkaline cleaning products like Tile Doctor Remove and Go. The floor was rinsed again afterwards, and the soiling extracted with a wet vacuum before leaving it to dry off overnight.

Sealing a Victorian Tiled Hallway Floor

The next day the moisture levels of the tiles were checked with a damp meter to ensure they were dry enough to be sealed. The readings were fine, so I was able to apply a couple of coats of Tile Doctor Colour Grow which is a breathable colour enhancing sealer. This is a super durable product which will give great protection to the floor, especially when it is in a high traffic area such as a hallway.

Victorian Tiled Hallway After Renovation Fulham Victorian Tiled Hallway After Renovation Fulham

My client was amazed with the transformation and said he never expected it to come out as good as it did. I must admit considering the state it was into to start with I can understand his expectations mustn’t have been that high.

Victorian Tiled Hallway After Renovation Fulham

For aftercare I recommended the use of Tile Doctor Neutral Tile Cleaner to maintain the floor, this is a pH neutral product which will ensure the longevity of the newly applied sealer and is mild enough to use every day. Its supplied as a concentrate so you only need a small amount of cleaning fluid to clean the floor and so a one litre bottle will last a while.

 

Professional Restoration of a Victorian Tiled Hallway in South London

Restoration of an Unloved Victorian Tiled Hallway Floor in Fulham Read More »

Acid Damaged Black Granite Sink Countertop Renovation Clapham

Renovating an Acid Damaged Black Granite Countertop in Clapham

1 Comment / Clapham Tile Cleaning, Granite Tile Cleaning /

This Black Granite sink countertop was damaged by a cleaning company during an end of tenancy clean at a rental property in Clapham South London. Granite is a very robust stone, but acidic cleaning products will etch it and damage the factory polish thereby ruining its appearance.

Acid Damaged Black Granite Sink Countertop Clapham Before Renovation

Naturally the landlord was not very happy and was considering having it replaced at the cost of the cleaning company who really should have known better. This however would have taken time to source and replace so after searching for a solution on-line I was asked to pop round and see if I could resolve the problem. We don’t just help resolve problems with tiles, jobs like this add a little variety to our day.

Acid Damaged Black Granite Sink Countertop Clapham Before Renovation

The landlord was relieved to hear that the problem could be fixed when I visited site. My solution was to re-polish the granite using a combination of hand-held burnishing blocks and six-inch burnishing pads fitted to a flex machine. He agreed my quote which he passed on to the cleaning company and we arranged a time to get the work done ahead of his new tenant moving in.

Restoring the Appearance of a Granite Countertop

To bring back the appearance of etched Granite we have found its necessary to use various grits of polishing pads and handheld blocks which are made from industrial diamonds. The larger 6-inch pads fit into a handheld buffer which helps to make the process easier.

I started though with the application of a coarse 200-grit hand block to remove the deeper etching from the damaged areas and then moved on to refinishing the surface with the diamond burnishing pads of increasing grits. Water is used to lubricate the process and remove the fine slurry that is generated. I finished on a 3000-grit pad which is applied dry with only a small amount of water to really bring up the polish and ready for sealing.

Sealing a Granite Countertop

To protect the Granite a couple of coats of Tile Doctor Colour Grow sealer was applied. This sealer is an impregnator which soaks into the pores of the stone giving long lasting protection, it’s formula also contains a colour enhancer which brought out the dark Black colours in the Granite.

Acid Damaged Black Granite Sink Countertop Clapham After Renovation

Once done the countertop looked new again and my the landlord was so happy the problem had been resolved, I’m sure the cleaning company were pleased as well as it saved them lot of hassle and money to replace the countertop. The cleaning company took our details for any future mishaps, hopefully they had learned a lesson though!

The property was now ready for the new tenant.

Acid Damaged Black Granite Sink Countertop Clapham After Renovation Acid Damaged Black Granite Sink Countertop Clapham After Renovation

 

Professional Renovation of a Granite Countertop in a South London Bathroom

Renovating an Acid Damaged Black Granite Countertop in Clapham Read More »

Victorian Hallway Renovation Brixton Hotel

Restoring a Victorian Hallway Floor in a Brixton Hotel

1 Comment / Brixton Tile Cleaning, Victorian Tile Cleaning /

This Victorian floor was found during the refurbishment of a hotel in Brixton, South London. The manager wanted a practical surface that could cope with day-to-day traffic and given this was a period feature of the property why not bring it back into use. Working in a narrow corridor in a busy hotel would normally be very difficult but as the property was being renovated there were only a few people around so it wouldn’t be an issue.

Victorian Hallway Renovation Brixton Hotel Before Restoration Victorian Hallway Renovation Brixton Hotel Before Restoration

The tiles were stained black with dirt and grease and badly damaged around the perimeter which was probably the reason it was covered up in the first place. Not a problem though, in fact these old Victorian tiled floors are very resilient and I have renovated floors in worse condition than this.

Cleaning and Repairing a Victorian Tiled Hallway Floor

To tackle the dirt and grease the floor was sprayed with a combination of Tile Doctor Pro-Clean mixed with Tile Doctor Remove and Go which was left to soak in for ten minutes and then scrubbed in with a black pad fitted to a rotary machine. This process was repeated several times rinsing off the soiling with water and extracting with a wet vacuum after each clean.

Once most of the dirt and grease had been removed repairs were carried out starting with the removal of the broken tiles and rubble. The subfloor was then built up with a self-levelling compound and then once set re-tiled with matching replacements. Luckily, there are a few places that we can source either original reclamation Victorian tiles or reproduction tiles that are usually a very good match.

Victorian Hallway Renovation Brixton Hotel During Restoration Victorian Hallway Renovation Brixton Hotel During Restoration

The next stage was to further clean up the tiles by giving the whole floor an acid rinse using Tile Doctor Grout Clean-up which has several benefits which include the removal of mineral deposits such as grout smears and alkaline salts. Salts in particular can be a problem with old floors like this as they were laid before the invention of damp proof membranes. Additionally using an acidic product at this stage neutralises the pH level of the floor after the use of strong alkaline cleaners earlier in the restoration. The floor was then left to dry out overnight.

Victorian Hallway Renovation Brixton Hotel During Restoration Victorian Hallway Renovation Brixton Hotel After Restoration

Sealing a Victorian Tiled Hallway Floor

We returned the following day to seal the tiles. First checking the moisture level of the tiles with a damp meter to confirm the floor was dry, which it was. Tile Doctor Colour Grow was chosen as the sealer, it’s an impregnator that soaks into the pores of the tile protecting it from within. It is also a breathable sealer so will cope with any moisture rising through the floor

Victorian Hallway Renovation Brixton Hotel After Restoration

As you can see from the pictures the hallway was transformed, the previously dark dingy space was now bright and clean, and the tiles looked stunning. Our client was very happy with the result and once all the renovations are completed, he will be ready to re-open the hotel.

Victorian Hallway Renovation Brixton Hotel After Restoration

 

Professional Restoration of a Victorian Tiled Hallway in a South London Hotel

Restoring a Victorian Hallway Floor in a Brixton Hotel Read More »

Indian Sandstone Patio Floor Transformation in Chiswick

Indian Sandstone Patio Transformed in Chiswick

1 Comment / Sandstone Tile Cleaning /

This Indian Sandstone patio renovation was completed in Chiswick during the summer. I thought I would share it with as there was ten years of lichen and grime built-up on the stone that needed removing. Also, patio cleaning is not something that people generally associate with Tile Doctor but the fact is our stone cleaning equipment works just as well outdoors as it does in (weather permitting) so it is something we do.

Indian Sandstone Patio Before Renovation Chiswick Indian Sandstone Patio Before Renovation Chiswick

Indian Sandstone is a very beautiful stone and looks great when its clean, however outside it will soon degrade due to the weather and really needs to be maintained annually to keep it looking at its best. As mentioned earlier this patio had not been touched for ten years and due to the surrounding trees and other vegetation it was badly stained with dirt, algae and lichen turning everything dark.

This project was a difficult one to quote for as you never know what your going to find under all that dirt so I had to set the customers’ expectations accordingly

Deep Cleaning an Indian Sandstone Patio in Chiswick

Cleaning started by pressure washing the stone and mortar to dislodge as much muck and grime as possible and reveal the stone underneath. It was a large patio but fortunately I have a professional high-pressure machine that cuts through the dirt very effectively.

With the soiling removed the next step was to remove ingrained dirt and blackspots from the Sandstone. To do this a strong dilution of Tile Doctor Patio Cleaner was sprayed on to the stone and left to soak in for about forty minutes and agitated with a brush.

I find dwell time is essential for this product so it’s worth experimenting with longer times If needed. This product is very strong and really designed for professional use so If your using it yourself do read the label to make sure its compatible with the stone and do wear protection.

Once done the patio was rinsed with hot water (circa 70 degrees) and the soiling removed with a wet vacuum. It was then inspected and any stubborn stains re-treated.

Indian Sandstone Patio After Renovation Chiswick Indian Sandstone Patio After Renovation Chiswick

This process took a whole day to complete and I managed to get the Indian Sandstone paving incredibly clean. The subtle colours of the stone paving were really evident and made a massive transformation from the original.

 

Restoration of an Indian Sandstone Patio in London

Indian Sandstone Patio Transformed in Chiswick Read More »

Vinyl Covered Quarry Tiled Floor Restoration Cheam

Vinyl Covered Quarry Tiled Floor Restored in Cheam

1 Comment / Cheam Tile Cleaning, Quarry Tile Cleaning, Work by Category, Work by Location, Work History /

The owner of this property in the South London suburb of Cheam got in touch about restoring a Quarry tiled floor that had been covered with Vinyl tiles. After surveying the floor, it became clear that some of the original Quarry tiled floor was missing and had been replaced with concrete before covering with Vinyl.

Vinyl Covered Quarry Tiled Floor Before Restoration Cheam Vinyl Covered Quarry Tiled Floor Before Restoration Cheam

To fully restore the Quarry tiles floor, it would therefore be necessary to dig out the concrete sections and tile with matching quarry tiles which had been supplied by the client. Once done we would then need to renovate both the old and the new sections of floor and seal them to achieve a consistent appearance. I was also asked to dig out an old matwell and prepare it for a new mat as part of the work.

This was a large job, but following a site visit I was able to provide my client with an accurate price and arranged a time to carry the work out which would take five days.

Removing Vinyl Tiles

The first part of the job was to lift the existing Vinyl tiles which had been laid on top of the Quarry tiles. I used a heat gun to help loosen the adhesive and then assisted with a steamer scrubbed Tile Doctor HBU Nanotech stripper into the floor to remove the glue and bitumen from the surface of the newly exposed Quarry tiles.

Vinyl Covered Quarry Tiled Floor During Restoration Cheam Vinyl Covered Quarry Tiled Floor During Restoration Cheam

Restoring the Appearance of a Quarry Tiled Floor

The soiled solution was extracted with a wet vacuum and I followed up by giving the Quarry tiles an acid rinse using Tile Doctor Acid Gel. The Gel is applied to the tiles and then scrubbed in with a Black pad fitted to a rotary machine. This process removes old traces of cement and grout from the quarry tiles and further cleans them up. After this the floor was rinsed thoroughly and the soil extracted with a wet vacuum.

Vinyl Covered Quarry Tiled Floor During Restoration Cheam Vinyl Covered Quarry Tiled Floor During Restoration Cheam

The next focus was on digging out the concrete areas mentioned earlier and then preparing the subfloor for tiling with self-levelling compound, which of course needs time to set. Once ready the replacement tiles were fixed in place making cuts as necessary and placing them to follow the original floor pattern. This may sound quite this sound straight forward, but this part of the job took some time to complete. The floor was left for a couple of days so the new tiles could set and the whole area could dry out before sealing.

Vinyl Covered Quarry Tiled Floor After Cleaning Cheam

Sealing a Quarry Tiled Hallway Floor

I returned later to seal all the Quarry tiles with Tile Doctor Colour Grow which brings out the deep Orange colours in the tiles whilst adding protection from staining and ingrained dirt. This sealer works by occupying the pores in the tile so dirt cannot become ingrained there. Four coats of sealer where applied across the whole floor leaving a nice matt finish that was consistent across the whole floor.

Vinyl Covered Quarry Tiled Floor After Sealing Cheam Vinyl Covered Quarry Tiled Floor After Sealing Cheam

Before leaving I discussed with the client the best way to maintain the floor in the future and recommended the use of Tile Doctor Neutral Tile Cleaner which is a pH neutral cleaner. This is important as its gentle enough to use frequently and won’t strip off the newly applied sealer like many household floor cleaners will. Its supplied in concentrated form so a small amount of cleaner goes a long way.

The client was delighted with the results, they were very pleased to see the back of the tired Vinyl floor and pleased the floor now looked consistent throughout.

Vinyl Covered Quarry Tiled Floor After Sealing Cheam

 

Professional Restoration of a Quarry Tiled Hallway in South London

Vinyl Covered Quarry Tiled Floor Restored in Cheam Read More »

Amtico Vinyl Floor Before Cleaning After Sealing Wimbledon

Maintaining Amtico Vinyl at Wimbledon Hair Salon

1 Comment / Vinyl Tile Cleaning, Wimbledon Tile Cleaning, Work History /

Most people don’t realise this but Amtico recommend their floors are protected against scuffs and scratches with a sealer or floor care dressing as they call it and like any product you apply to a floor it will wear off over time due to the constant abrasion of floor traffic. This is very similar to the problem we face with tile and stone most of which also benefit from the protection of a sealer.

With this in mind I was asked to visit a Hair Salon in Wimbledon which as well as being famous for its annual Tennis tournament is a large town to the southwest of London. Their Amtico flooring had lost a lot of its appearance and a recent redesign had exposed a few obvious areas where equipment was once positioned. It was clear that the whole floor would need to be stripped of what was left of its protective coating and resealed.

Amtico Floor Wimbledon Hair Salon Before Cleaning

Deep Cleaning Amtico Flooring

It was necessary to strip the floor of its old coating first as to apply a fresh sealer would simply have locked in the dirt and led to different layers of sealer on the floor which can leave some areas looking darker than others.

To strip off the old coating and clean the we used Tile Doctor Vinyl Strip mixed with hot water. This was left to sit on the floor for a short while before being scrubbed in with a scrubbing pad fitted to a rotary floor buffer and then the soil was removed using a wet and dry vacuum. It’s worth noting that to scrub this floor we used a finer scrubbing pad than normal because using a black stripping pad would have scratched the Vinyl. We then rinsed the floor twice with water to remove any residue and extracted the water with a wet vacuum.

Normally we these jobs we would look to let the floor dry off overnight and come back the next day to seal the floor, however given the commercial nature of the business this was not a practical option so the Amtico floor was force dried using industrial air movers.

Sealing Amtico Flooring

Once the floor was dry we were able to press on with the application of the sealer which for Amtico and other Vinyl flooring we recommend Tile Doctor Vinyl Shine floor polish which leaves a nice subtle shine. You have to wait for a coat to dry (approx. 30 minutes) before applying the next, so this process can take a while to complete, in this case three coats were applied to achieve the desired finish.

Amtico Floor Wimbledon Hair Salon After Cleaning

We managed to strip and seal the whole floor in a day, so the owner was able to open for business on the Monday.

Amtico Floor Wimbledon Hair Salon After Cleaning

 

Dirty Vinyl Flooring Cleaned and Sealed at a Hair Salon in South London

Maintaining Amtico Vinyl at Wimbledon Hair Salon Read More »

Old Victorian Tiled Hallway Renovated in Tooting

Old Victorian Tiled Hallway Renovated in Tooting

1 Comment / Victorian Tile Cleaning, Wimbledon Tile Cleaning, Work History /

We were asked by the customer in Tooting, if we could restore this Victorian tiled hallway floor that they had found underneath a carpet while they were refurbishing their property. Interestingly he had already had a quote from another company, but they were unable to identify what type of tile it was. Old floors like these are not for the in-experienced and if you look closely at my website you will see I have published over 60 detailed accounts of tile cleaning and restorations since 2012.

Victorian Tiled Hallway Before Restoration Tooting Victorian Tiled Hallway Before Restoration Tooting

I could see there was a lovely Victorian Tiled floor hiding underneath the paint spots and plaster dust and carried out a test patch to show him what the floor would look like when it was clean. I also showed him pictures of similar floors that we have restored over the years and was able to show the finishes you can achieve from different sealers. Convinced I was the chap for the job he booked me in there and then.

Cleaning a Heavily Soiled Victorian Tiled Floor

Returning on the agreed date we started the cleaning process by pre-wetting the floor with water. This was followed by the application of a strong dilution of Tile Doctor Remove and Go which was left to soak in for approximately ten minutes. This product is designed for the safe removal of old coating such as sealers from Tile, Stone and Grout and I knew it would be ideal for the task. The solution was then scrubbed into the Victorian tile and gout using a rotary machine fitted with a black stripping pad. The scrubbing process released a lot of the stains and dirt from the floor which were then extracted with a wet vacuum. The process was then repeated until all the sections were treated.

The floor was then rinsed with water and the resultant residue extracted using a wet vacuum before treating the tiles to an Acid Wash to neutralise any alkaline salts and remove mineral deposits and old grout smears. This was done by applying Tile Doctor Acid Gel for around fifteen minutes and then removing it with a final rinse.

Cleaning the hallway took up most of the day and I needed the tiles to be dry before the next step of applying a sealer, so after discussing progress with the owner I left for the day and gave the floor three days to dry out.

Sealing a Victorian Tiled Hallway

On our return I first checked the floor with a damp meter to make sure it had dried out thoroughly. All was well, so we proceeded to seal the tiles using Tile Doctor Colour Grow which is an impregnating sealer that leaves a matt finish and soaks into the pores of the tile protecting it from within and enhancing its appearance in the process.

Victorian Tiled Hallway After Restoration Tooting Victorian Tiled Hallway After Restoration Tooting

Four coats of sealer were needed and as you can see by the final pictures the hallway now looks fantastic and needless to say the customer was over the moon with the final results.

Victorian Tiled Hallway After Restoration Tooting
 

Professional Victorian Tiled Hallway Cleaning in South London

Old Victorian Tiled Hallway Renovated in Tooting Read More »

Painted Quarry Tiled Porch Floor Restored in South Croydon

Painted Quarry Tiled Porch Floor Restored in South Croydon

1 Comment / Croydon Tile Cleaning, Quarry Tile Cleaning, Work History /

I thought you might find this Quarry tiled floor restoration from a property in South Croydon interesting, especially considering the transformation that we were able to achieve. The Quarry Tiles were in a covered porch at the front of the property and the previous owners had painted them with red tile paint several times and they had also become stained from other decoration work. They were now in a neglected state and really needed to be stripped of paint and restored.

Quarry Tiled Porch Before Restoration South Croydon Quarry Tiled Porch Before Restoration South Croydon

Removing Paint from Quarry Tiles

To get the red paint off the Quarry tiles, Tile Doctor Nanotech HBU Remover was applied to the floor and left to dwell and soak into the tile and grout for about twenty minutes. HBU stands for Heavy Build-Up and is a strong product that utilised small Nano sized abrasive particles to remove floor coatings. There were a number of layers of paint that needed removing so a scouring pad was used to work the product into the floor.

Quarry Tiled Porch During Restoration South Croydon
As you can imagine that paint didn’t want to come off easily, so it took several attempts before the Quarry tiles were completely clean. After each application the floor was given a thorough rinse to remove any trace of product and the soil removed with a wet vacuum.

Grout Renovation with a Charcoal Grout Colourant

When we eventually cleaned everything off, we found the grout had absorbed the paint in places leaving a patchy appearance. Removing and replacing the grout would take a long time so I suggested to the owner that we Colour Seal the grout lines using a Charcoal Grey Grout Colourant. The colourant is basically painted onto the grout with a small brush and when it hardens it forms a protective barrier over the grout and would give a consistent appearance. The process is quite quick and given then grout lines had already been given a good scrub the colourant should achieve a good bond. The owner was happy to for us to proceed and I think you will agree we achieved a very good result.

Sealing Porch Quarry Tiles

The floor was left to dry out for a few days and we returned to finish the restoration by sealing the tiles in order to protect them from future staining and also make them easier to clean. I used an impregnating colour enhancing sealer called Tile Doctor Colour Grow for this purpose and I think you will agree the floor looks much improved.

Quarry Tiled Porch Before Restoration South Croydon Quarry Tiled Porch Before Restoration South Croydon

My customer was delighted with the final result and left the following review on our website.

“My small hall floor proved to be a challenge but couldn’t be more pleased with the results. Very professional service throughout. I wouldn’t hesitate to recommend.
Helen B, South Croydon.”

Quarry Tiles Restored in South London

Painted Quarry Tiled Porch Floor Restored in South Croydon Read More »

Quarry Tiled Floor Before and After Renovation Coulsdon

Screed Covered Quarry Tiled Floor Renovated in Coulsdon

1 Comment / Purley Tile Cleaning, Quarry Tile Cleaning, Work History /

Pictures below of a Quarry Tiled floor that a customer had discovered when taking up the lino at her house in Coulsdon. Realising the floor was original and worth saving she contacted Tile Doctor and I popped round to take a look.

A lot of the tiles had been covered in a screed to provide a flat base for the Lino and that would need removing. In order to be sure what treatments would work to remove the screen and successfully restore the Quarry tiles without causing any damage I ran a couple of tests and everything seemed ok.

Quarry Tiled Floor Before Renovation Coulsdon Quarry Tiled Floor Before Renovation Coulsdon

We could both see the job wasn’t going to be easy and would take some days to complete so I worked out a price which was accepted and we agreed a date for the work to start.

Quarry Tiled Floor Before Renovation Coulsdon Quarry Tiled Floor Before Renovation Coulsdon

Removing Screed from Quarry Tiles

The Quarry tiles in the WC hadn’t been covered in Lino so they would just need a good clean and seal so the main work would be in the Hallway and Kitchen. Fortunately my customer was having a lot of other work done in the house and was in the middle of stripping the walls so I didn’t need to worry too much about protecting the skirting boards etc.

Working in sections I soaked the screed in water and then carefully chipped away at it until it came loose, it was slow work but I could see the process was working as expected and eventually all the Quarry tiles were revealed. There was still a lot of cement from the screed stuck to the surface of the tile so after sweeping up the chippings I set to work applying a strong solution of Tile Doctor Grout Clean-up to the tiles and leaving it to soak in for a short while. Grout Clean-Up is an acidic product that we normally use for removing grout smears from the surface of tiles. The solution was scrubbed in and then rinsed off with water and extracted with a wet vacuum.

Quarry Tiled Floor During Renovation Coulsdon Quarry Tiled Floor During Renovation Coulsdon

To get the tiles in the toilet clean I gave them a good scrub with Tile Doctor Pro-Clean which is a reliable and effective Tile and Grout cleaner. Once clean they were rinsed with water and dried with the wet vacuum.

Sealing Quarry Tiles

I had timed my visit between working being carried out at the property so I was able to leave the floor for a few days so it could thoroughly dry out. I returned later to check the Quarry tiles were dry and completed the renovation by sealing the floor with Tile Doctor Seal and Go which is a water based sealer that works really well on Quarry tiles. Five coats of Seal and Go were needed to fully seal the tiles and the floor now looks transformed.

The owner was very satisfied with the improvements and before leaving I advised to cover the floor before starting the decorating work.

Old Quarry Tiles Restored in Coulsdon, Surrey

Screed Covered Quarry Tiled Floor Renovated in Coulsdon Read More »

Victorian Tiled Hallway Before and After Restoration Streatham

Dirty and Stained Victorian Hallway Tiles Rejuvenated in Streatham

1 Comment / Brixton Tile Cleaning, Victorian Tile Cleaning, Work History /

If you like in an older property in the UK and never looked under the carpets you might want to take a minute and have a look. I still find it surprising how many of my customers had no idea they lived in a house with a classic tiled hallway.

We were recently asked to restore a fantastic geometric-patterned Victorian tiled floor which had been found underneath carpet during decoration work in the hallway of a property in Streatham.

Victorian Tiled Hallway Before Restoration Streatham Victorian Tiled Hallway Before Restoration Streatham

The once black and white tiles were now absolutely caked in dirt, glue deposits, cement, paint stains and plaster. It would be no small feat to get the tiles back to looking their best again. Fortunately, Victorian tiles are very resilient and we have a lot of experience in their restoration so I was confident that with the right products and techniques we could get the job done to a high standard.

Cleaning Dirty and Stained Victorian Hallway Tiles

The tiled hallway was quite long, yet only around a metre wide, so I felt the best approach would be to work in small sections at a time. Our method was to soak the tiles with Tile Doctor Remove and Go and leave the product to work its magic for roughly ten minutes, before scrubbing the surface to remove the muck. Some of the more viscous and stubborn stains were scrapped away carefully by hand within the assistance of a steam cleaning machine. The resulting residue was extracted using a wet vacuum. Remove and Go is a particularly effective cleaner in scenarios like this, as it is specially formulated to strip away old sealers, adhesives and even paint without harming the tile itself.

The next step was to run a rotary machine fitted with a Coarse 200 grit burnishing pad lubricated with water over the floor to achieve a consistent finish. The floor was then rinsed to remove the soil generated in the process.

Old floors like these laid before the invention of damp proof membranes can be a concern as damp rising up through the tile as it dries can leads to efflorescence salt deposits appearing on the tile surface. So, to avoid potential issues Tile Doctor Acid Gel was applied to the floor to neutralise any salt deposits and the floor given a final rinse to remove any trace of cleaning products.

Sealing Victorian Hallway Tiles

After finishing the clean, we left the floor to dry out over the weekend. With old floors like this one, we tend to recommend allowing a drying period of at least 48 hours to ensure the floor is completely dry before applying a sealer.

Upon arriving back at the property, we ran a few quick damp tests and once satisfied the floor was dry proceeded to seal the tiles using Tile Doctor Colour Grow. Colour Grow is a colour-intensifying, impregnating sealant that leaves a natural-look matte finish. It works by occupying the pores in the clay and it’s also a fully breathable sealer which is important for these old floors where damp may be any issue.

Victorian Tiled Hallway After Restoration Streatham Victorian Tiled Hallway After Restoration Streatham

The customer was absolutely thrilled with the results. She even went as far as to leave a review expressing how pleased she was during the weekend before we had chance to seal the tiles.

Bill and Wayne were brilliant! On time, got to work straight away, lovely and friendly and very professional. They have done a lovely job and I’m looking forward to them coming to seal the tiles to finish it o f tomorrow afternoon. Wouldn’t hesitate to recommend. Thanks guys!

Professional Restoration of a Victorian Tiled Hallway in South London

Dirty and Stained Victorian Hallway Tiles Rejuvenated in Streatham Read More »

Quarry Tiled Floor Before and After Renovation Croydon

Rebuilding and Restoring a Damaged Quarry Tiled Floor in Croydon

1 Comment / Croydon Tile Cleaning, Quarry Tile Cleaning, Work History /

There is perhaps nothing more irritating for a homeowner than to discover a leaking pipe. Even worse still is when that leak occurs underneath a natural stone floor!

This recent customer of mine, who lives in Croydon, had unfortunately discovered a leaking pipe underneath her Quarry tiled kitchen floor. The plumbers had dug a trench in the floor to replace the pipe and fix the problem. As you can see in the photos below, the original tiles were not replaced and the entire floor was generally left in a bit of a mess.

Quarry Tiled Floor Before Rebuild Croydon Quarry Tiled Floor Before Rebuild Croydon

The customer had been trying to find a professional company to restore the floor, but her insurance company would only agree to sending normal cleaning companies to the job. Given the reality of the situation, you won’t be surprised to know that these companies all politely refused!

The situation went unresolved for over six months before the customer finally decided to contact Tile Doctor to restore the floor.

Rebuilding and Cleaning a Quarry Tiled Floor

The restoration took place over the space of six days. Our first port of call was to replace the tiles that had been removed as part of the plumbing work. This wasn’t the easiest process as we had to level up the floor before the tiles could be replaced.

Making matters more complicated, the tiles were all hand-made, and it was a bit like completing a jigsaw to avoid lippage. Lippage – for those unfamiliar with the term – means when a floor is laid unevenly and it can make walking on it hazardous.

Quarry Tiled Floor During Rebuild Croydon Quarry Tiled Floor During Rebuild Croydon

Once the tiles were reinstalled, it was time to give the whole floor a deep clean. For this, we used Tile Doctor Oxy Gel, leaving it to dwell on the surface for around ten minutes, before scrubbing it into the stone in combination with hot water. Oxy Gel is a strong, alkaline-based cleaner which works effectively to break down dirt and grime, as well as old sealers and waxes.

The next stage of the restoration was to rinse the floor with fresh water, and then lay down Tile Doctor Acid Gel for 15 minutes. Acid Gel is a blend of phosphoric and hydrochloric acids in gel form which is used to neutralise any grout haze and efflorescence on the tiles.

Sealing a Quarry Tiled Floor

After completing the deep cleaning process, we rinsed the floor again with fresh water and then left it to dry for three days. Giving the floor enough time to dry was important, since any excess moisture would not have allowed us to complete the restoration by sealing the tiles.

After a few days, however, the floor was indeed thoroughly dried and could receive a fresh seal. We sealed the floor using five coats of Tile Doctor Seal and Go, a topical sealer which eliminates traditional two-step sealing methods. What this means is that it provides both a robust surface seal and a high-quality low sheen finish – in one product.

After six months of difficulty and disruption, the customer was very happy to have her Quarry floor completely restored in just six days. Check out the photos below to see the outcome.

Quarry Tiled Floor After Rebuild Croydon Quarry Tiled Floor After Rebuild Croydon

 

Professional Tile Repairing, Cleaning and Sealing for a Quarry Tiled Floor Restoration in Croydon

Rebuilding and Restoring a Damaged Quarry Tiled Floor in Croydon Read More »

Old Victorian Tiled Hallway Fully Restored in Brixton

Old Victorian Tiled Hallway Fully Restored in Brixton

1 Comment / Brixton Tile Cleaning, Victorian Tile Cleaning, Work History /

I was asked to look at an old Victorian Tiled Hallway floor at a house in Brixton, South London. This classic floor had been discovered underneath an old hallway carpet while refurbishment works were being carried out. I went over initially in mid December to survey the floor and talked the owner through a number of similar restorations we had completed in the past. I could see this floor would need a deep clean to remove the years of dirt and also some tiling would needed to be done to tile a section of concrete near the stairs that had been dug out to lay pipe work when central heating had been installed many years prior. She didn’t want to make a commitment at that point so I left her with our quotation so she could think it over. I suspect she had other quotes to review however I’m pleased to say that she decided to give the work to us.

Victorian Tiled Hallway Before Restoration Brixton Victorian Tiled Hallway Before Restoration Brixton

Once we had agreed a date to do the work I started looking around for replacement tiles that would be needed to restore the floor. Unfortunately the octagonal ones are not made any more and I couldn’t hold of any salvaged ones either. Having been involved in Tile Restoration work for some time now, I have a list of companies and reclamation yards that are usually a good source for these materials. To resolve the problem I sourced square tiles with a similar look and would cut them to the same shape when on site.

Victorian Tiled Hallway Before Restoration Brixton

Cleaning and Repairing a Heavily Soiled Victorian Tiled Floor

I returned after Christmas to start the restoration process which was due to take two to three days. To start the restoration process we applied a strong dilution of Tile Doctor Remove and Go to the floor, allowed it to soak in for ten minutes and then worked it into the tiles using a scrubbing pad fitted to a rotary machine. Remove and Go is a product that removes coatings from tiles including in this case old paint splashes and carpet adhesive. The floor was then rinsed and the now dirty solution extracted using a wet vacuum.

Victorian Tiled Hallway During Restoration
Once this was finished the floor was looking cleaner and the next step was to tackle the concrete area near the stairs where the heating pipes had been buried. The cement had to be carefully chipped away and then refilled with fresh cement but to the level of the original surface so we could lay new tile on top. We use a quick setting compound for this and were able to start relaying and grouting the section with new specially cut tiles later that afternoon.

Victorian Tiled Hallway During Restoration Brixton Victorian Tiled Hallway During Restoration Brixton

Naturally the strip of new tiles were quite noticeable against the old and although the customer was happy I knew I could get a better result by running a very coarse burnishing pad fitted to a heavy buffing machine over the surface. I used a diamond resin hybrid 50 grit pad to take off the top layer of the tiles and then refinished the surface with a 100 and then 200 grit pad. This did the trick and it was impossible to tell the old and new apart.

After this I carried out an acid wash using Tile Doctor Grout Clean-up diluted with four parts water. The purpose of this was to remove any old grout smears and mineral deposits from the floor as well as counteract any possibility of unsightly efflorescence salts rising up through the tile at a later stage. This is quite a common problem with these old floors which don’t have a damp proof coarse and certainly I could see no trace of a DPC when I dug out the cement around the pipe work earlier.

The last step in the cleaning process was to steam the entire floor and then leave it to dry off fully over the New Year break.

Sealing a Victorian Tiled Floor

I returned on the 2nd of January and after inspecting the floor to ensure it was clean and free of damp I began to seal it using Tile Doctor Colour Grow which is an impregnating sealer that soaks into the pores of the tile protecting it from within and enhancing its appearance in the process. Four coats of sealer were needed and as you can see by the final pictures the final results were outstanding.

Victorian Tiled Hallway After Restoration Brixton
Period features such as old Victorian floors add a lot of value to and the customer was over the moon with the transformation and is so happy she chose to have the floor restored rather than covering it back up with carpet.

Victorian Tiled Hallway After Restoration Brixton
 

Professional Victorian Tiled Hallway Restoration in South London

Old Victorian Tiled Hallway Fully Restored in Brixton Read More »

Travertine Kitchen Floor Before After Sealing Sanderstead

Renovating Travertine Kitchen Floor Tiles in Sanderstead

1 Comment / Purley Tile Cleaning, Travertine Tile Cleaning, Work History /

This customer, who lives in Sanderstead located between Croydon and Purley in Surrey had been experiencing difficulties in keeping her beautiful Travertine tiled kitchen floor in good condition. Over the years it had suffered from a heavy build up of dirt and oily stains, not to mentioned a number of cracks and small holes. Needless to say, the customer was keen to have the Travertine tiles and grout renovated and made easier to keep clean.

Travertine Kitchen Floor Before Cleaning Sanderstead Travertine Kitchen Floor Before Cleaning Sanderstead

Restoring Travertine Flooring

To begin the renovation, I applied Tile Doctor Remove and Go across the entirety of the large tiled area. This heavy duty remover breaks down any old sealers and other coatings, leaving the area ready to cleaned or, in this case, burnished.

Burnishing is a method for cleaning and polishing certain types of high-end stone, including Travertine, Marble, and Limestone. Our burnishing system involves the application of four diamond encrusted pads of varying grits. Firstly, I applied the Coarse grit pad, which helps to break down any dirt and stains on the surface of the tiles. Then, I worked my way through the Medium, Fine, and Very Fine pads, using a little water which acts to lubricate the process gradually building the polish on the Travertine. The floor is rinsed with water between the application of each pad to remove the soil that is generated and also give a final rinse at the end before leaving to dry.

To round off the first day of work, I filled any cracks and holes in the Travertine using a colour matching resin which greatly improved the look of the tile.

Travertine Kitchen Floor Cracked Tile Before Repair Sanderstead Travertine Kitchen Floor Cracked Tile After Repair Sanderstead

Sealing Travertine Tiles

The following day I returned to the property to seal the tiles checking first that the floor had dried. I use a moisture meter to do this and it confirmed the floor was dry so I proceeded to seal the floor using our colour intensifying impregnating sealer Tile Doctor Colour Grow. Once that was dry, I added the finishing touches by buffing the floor with a soft white buffing pad. As you can see from the photographs, the combination of a fresh seal and polish worked wonders.

Travertine Kitchen Floor After Sealing Sanderstead
We did such a good job with the floor that the customer asked if we could also improve the appearance of their natural stone fireplace which was suffering from bad rust and oil stains however I do a separate write up on that.

Travertine Kitchen Floor After Sealing Sanderstead
 

Cracked Travertine Tiled Kitchen Floor Fully Restored in Surrey

Renovating Travertine Kitchen Floor Tiles in Sanderstead Read More »

Victorian Tiled Hallway Before and After Restoration Fulham

Heavily Soiled Victorian Tiled Hallway Restored in Fulham

1 Comment / Battersea Tile Cleaning, Victorian Tile Cleaning, Work History /

This Victorian tiled floor at a house in Fulham was in an absolutely horrendous state. As you can see from the first photograph, the tiles were caked in layer upon layer of muck, including paint and glue stains. This was due to the floor being unknowingly hidden for many, many years under carpet.

Victorian Tiled Hallway Before Restoration Fulham
Needless to say, the property owner was desperate to remedy get the fantastic pattern floor back into good nick, and so contacted me for assistance. I travelled up to the property in the town of Fulham in South West London, which is famous for its football club, to survey the situation and begin the work. It was immediately clear that the thick layers of dirt and staining would need to be removed, before being treated to a new seal to provide long-lasting protection.

Victorian Tiled Hallway Before Restoration Fulham

Cleaning a Heavily Soiled Victorian Tiled a Floor

My product of choice for removing the extremely heavy soil buildup on the tiles was Tile Doctor NanoTech HBU (formerly UltraClean), a powerful solvent-based cream cleaner. What makes this product different from standard cleaners is its use of nano-sized cleaning particles to penetrate below tough stains, dissolve them, and lift them to the surface. NanoTech HBU is a highly versatile product which can be used on most types of natural stone floor, both polished and unpolished.

I laid down the NanoTech HBU and left it to dwell for a short period on the tiles, allowing it to begin eating through the dirt, before using a scraper in combination with a steamer to manually lift the muck away from the tiles. Next, to tackle the glue and paint marks, I applied Tile Doctor Remove and Go, a stripper specifically designed to break down adhesive and solvent stains, and then used a scraper and a scouring pad to manually remove the glue and paint in the affected areas.

Once this was done, I scrubbed in some more NanoTech HBU to dissolve any remaining muck before rinsing the area thoroughly with clean water. To complete the cleaning process, I laid some down some Tile Doctor Acid Gel, which is a blend of Phosphoric and Hydrochloric acids in gel form, to eliminate inherent grout haze and alkaline mineral deposits in the affected areas. I then left this to dwell for ten minutes before giving the floor a final rinse to remove any chemicals and soiled residue. The floor was left for a week to dry out before I returned to seal it.

Sealing a Victorian Tiled Floor

With these fantastic Victorian tiles now muck-free, I proceeded to seal the floor. I initially applied a single coat of Tile Doctor Colour Grow, which is an impregnating, colour-enhancing sealer that really brings out the colourful features of patterned Victorian tiled floors like this one.

Victorian Tiled Hallway After Restoration Fulham
Once this initial coat of sealant had dried in, I asked the customer which kind of finish she preferred for the floor. She decided on a sheen finish, and so I laid down an extra five layers of Colour Grow to ensure the desired appearance, as well as to guarantee durable surface protection against dirt, stains and spillages.

Victorian Tiled Hallway After Restoration Fulham
The customer was really pleased with the results of the restoration, and left the following feedback:

“Bill worked extremely hard to clean and seal our hall tiles. Everyone is amazed at how good they look. We are extremely pleased with the results.”

Victorian Tiled Hallway Before and After Restoration Fulham
Another great Victorian tiled floor brought back to life, and and satisfied customer!

Professional Victorian Tiled Hallway Restoration in South London

Heavily Soiled Victorian Tiled Hallway Restored in Fulham Read More »

Limestone Floor Before and After Burnishing Wandsworth

Limestone Kitchen Floor and Shower Tiles Refinished in Wandsworth

1 Comment / Limestone Tile Cleaning and Polishing, Wandsworth Tile Cleaning, Work History /

Sometimes, Tile Doctor customers will have more than one tiled area in need of professional maintenance. At this house in Wandsworth, South London; I was commissioned to clean and seal firstly a Limestone tiled kitchen floor, and a Limestone tiled shower unit.

Limestone Floor Before Cleaning Wandsworth

Cleaning and Sealing a Limestone Kitchen Floor

I started with the Limestone tiled kitchen floor which, like many other stone floors had not been treated to the correct regular care and had become dull and dirty over time as a result.

My first task involved applying Tile Doctor Remove & Go stripper in order to break down any old surface sealant and dirt. Then, I began the burnishing process, which essentially involves polishing with pads of varying grit. I started with a Medium 800 grit burnishing pad to provide an initial polish and grind away ingrained dirt, before refining this with a Fine 1500 grit pad to achieve a smooth surface. The burnishing pads are used in combination with a small amount of water.

Limestone Floor During Cleaning Wandsworth
After leaving the floor to dry for 24 hours, I sealed the tiles with Tile Doctor Colour Grow. This will provide durable surface protection for the future and also further accentuate the great natural shades in the Limestone. To add the finishing touches, I buffed the floor with a soft white buffing pad.

Limestone Floor After Burnishing Wandsworth

Cleaning and Sealing a Limestone Tiled Shower Unit

During the time it took for the Limestone tiled kitchen floor to dry, I set my sights on tackling the shower unit. The unit was suffering from a terrible amount of limescale, which would need to be removed using a set of hand held burnishing pads. Limescale deposits build up on surfaces which come into contact with hard water, and can become very unsightly if not dealt with promptly.

Limestone Shower Tiles Before Cleaning Wandsworth
This proved to be a more awkward job thanks to the intricate Limestone fittings on the shower walls. I used the smaller 6-inch burnishing pads fitted to a hand buffer, while for the kitchen floor I naturally used the larger sized pads attached to a heavy weight buffing machine.

With the limescale as bad as it was, I started to grind it off with a Very Coarse 120 grit burnishing pad, before working my way up gradually through the system of pads – each time using a slightly finer grit pad until I finished with the Ultra Fine 3000 grit pad and the surface finish had been restored.

Limestone Shower Tiles After Cleaning Wandsworth
Following this, I removed the silicone sealant around the shower fittings, and dealt with the mould growing behind it.

On the second day of work, I sealed both the kitchen floor and the shower unit. Much like the kitchen floor, the shower unit was sealed using Colour Grow to ensure long lasting protection, and fresh silicon was also fitted.

Two days of work and two rejuvenated Limestone features later, I was left with a very happy customer.

Limestone Shower Tiles Before and After Cleaning Wandsworth
 

Restoring the appearance of a Limestone Kitchen Floor and Shower in South London

Limestone Kitchen Floor and Shower Tiles Refinished in Wandsworth Read More »

Victorian Floor Restoration Putney Before and After Paint Removal

Victorian Tiled Floor Covered by Paint Restored to New in Putney

1 Comment / Putney Tile Cleaning, Victorian Tile Cleaning, Work History /

For whatever reason, property owners do sometimes decide to cover up their tiled floors, whether by using something like linoleum or, in some cases, simply painting over the area. Personally I blame that BBC TV series Changing Rooms for some of these disasters and I wouldn’t be surprised if they were to blame for what had occurred at this flat in Putney which believe it or not is an ancient parish that was historically part of Surrey as opposed to London.

The property owners had re-converted the building from two converted flats back into a single dwelling. However, the previous tenants of the bottom flat had decided to paint over the Victorian tiled floor in their section.

Victorian Floor Restoration Putney Before Paint Removal
Naturally the new owners wanted to have this paint covering removed, and for the Victorian tiles to be restored back to looking their best after a long time of being hidden. Here’s how I did it.

Removing Paint from a Victorian Tiled Floor

To remove the layer of paint from the surface of the tiles, I needed to use a solvent remover product specifically designed to remove paints, this was applied liberally to the affected area and left to dwell.

While the solvent remover was working its magic, I set about cleaning the remainder of the tiled area using Tile Doctor Remove & Go. Remove & Go also contains properties designed to break down solvents, as well as adhesives, along with any old sealer remaining on the tiles. This also helped to lift away any trapped dirt.

I then scraped off the top layer coat of paint and was left with a grey undercoat. To lift this out of the tiles and grout I used Remove & Go in combination with a steamer. The heat of the steamer helped to strip away the excess paint, making removal a much easier process.

Victorian Floor Restoration Putney During Paint Removal

Sealing a Victorian Tiled Floor

After leaving the area to dry for a full five days, I returned to the property to reseal the tiles.

My choice of sealer was Tile Doctor Seal & Go, which is a water-based blend of acrylic polymers designed to provide both a stain resistant surface seal and a long-lasting low-sheen finish. It is suitable for use on most kinds of unsealed, porous surfaces, including Slate, Quarry and Sandstone but works really well on Victorian tiled floors.

Victorian Floor Putney After Restoration Victorian Floor Putney After Restoration

The photo below shows the before and after results of the work, with no traces of the paint covering remaining on the tiles. It is a wonder why someone would choose to cover up such a fantastic Victorian patterned floor, but needless to say my client was very happy with what is for all intents and purposes a brand new feature for their property.

Victorian Floor Restoration Putney Before and After Paint Removal
 

Professional Tile Restoration of a Victorian Tiled Floor in Surrey

Victorian Tiled Floor Covered by Paint Restored to New in Putney Read More »

Terrazzo Flooring Redhill Church Before After Restoration

Terrazzo Tiled Flooring Restored at a Church in Redhill

1 Comment / Caterham Tile Cleaning, Terrazzo Floor Cleaning, Work History /

Every so often I will get the chance to undertake tiled flooring restoration work in public buildings, and late last year I was asked to clean and seal a Terrazzo floor at a church in Redhill. The floor wasn’t in great condition; not only was it suffering from a significant amount of dirt due to a lack of proper maintenance, but it was also marked by several cracks. Overall, the appearance of the floor was very displeasing and the church was keen to have me in to complete some repairs, along with a deep clean and seal.

Terrazzo Flooring Redhill Church Before Restoration Terrazzo Flooring Redhill Church During Crack Repair

Cleaning and Burnishing a Terrazzo tiled floor

Upon initial inspection of the floor, I was unable to say for certain whether there was any old sealer remaining on the tiles so to ensure it was removed I began the cleaning process by applying a layer of Tile Doctor Remove & Go, which is a powerful cleaner/stripper designed to both break down old layers of sealant and lift out any ingrained dirt.

I then gave the floor a rinse with water to remove any excess cleaning product, before moving onto a different cleaning process, known as burnishing. Burnishing involves polishing the surface with to achieve an aesthetically pleasing sheen finish. The Tile Doctor burnishing system consists of four diamond encrusted burnishing pads with different levels of grit.

Terrazzo Flooring Redhill Church Part Cleaned Terrazzo Flooring Redhill Church Part Cleaned

I began by applying a Coarse burnishing pad, before working my way through the system with Medium, Fine and finally Very Fine pads to achieve a very refined, high quality polished finish, you need to use a little water to help lubricate the burnishing and you need to rinse the floor after each pad to remove the slurry.

Terrazzo Flooring Redhill Church Cleaning in Progress Terrazzo Flooring Redhill Church During Burnishing

Once the floor had been allowed to dry completely following both cleaning processes, I set about filling the cracks in the tiles with two part resin stone filler.

Terrazzo Flooring Redhill Church During Crack Repair Terrazzo Flooring Redhill Church Crack Filled

Then, once the filler had dried, I re-polished the floor using only the extra fine burnishing pad, focusing my attention along the crack lines. This really helped to reduce the evidence of cracks and left instead a smoothed surface.

Sealing a Terrazzo tiled floor

The final stage of the restoration involved sealing the Terrazzo tiles with Colour Grow, which is Tile Doctor’s colour intensifying sealer that impregnates the stone seeping into its pores to provide protecting the floor from within with a robust seal capable of withstanding the high amount of traffic experienced by church floors. The last step was to buff the entire area with a soft white buffing pad.

Terrazzo Flooring Redhill Church After Terrazzo Flooring Redhill Church After

The church was very pleased with the results, especially that they were able to show it off for last year’s Remembrance Sunday and left the following comment on the Tile Doctor feedback system:

“Many thanks for the work on our Terrazzo floors. It’s only when you see the before and after that you realise how grubby they had become. We have had loads of complimentary comments as to how good they look. Bill Bailey was a very personable and professional contractor who put himself out to work around our requirements and others working in the buildings at the same time. More than happy to recommend the company and Bill personally. Many thanks for a job well done.”

Terrazzo Flooring Redhill Church Before and After Restoration
 

Professional Restoration of a Cracked Terrazzo Church Floor in Surrey

Terrazzo Tiled Flooring Restored at a Church in Redhill Read More »

Black Limestone Before and After in Wimbledon

Black Limestone Floor installation problems resolved in Wimbledon

3 Comments / Limestone Tile Cleaning and Polishing, Wimbledon Tile Cleaning, Work History /

I was recently asked to this property in Wimbledon in to see if there was anything we could do to resolve the problem with a recently laid Black Limestone tiled floor. The builders that had laid the Limestone did not cover or clean the tiles prior to sealing with an impregnating seal thereby trapping in all the dirt from the building works. They then grouted the tiles but didn’t clean the grout off the surface before putting on another two coats of sealer all of which resulted in a very poor finish.

Black Limestone Tile Showing Trapped Dirt in Wimbledon
Naturally the customer was not happy so called them back to rectify the problem and so they came back and tried to strip the sealer off with cloths and a chemical stripper. Then without rinsing the stone to remove the chemicals they added another two coats of sealer; in desperation the lady gave up with them and called me in.

Black Limestone Tile Showing Trapped Dirt in Wimbledon

Stripping the Limestone Tiled Floor

To resolve I tried all the sealant strippers available to me but couldn’t budge the mess effectively. The only other option available was to diamond grind the surface so I discussed this with the customer and she agreed to this and left me to carry on.

Initially I started with a coarse 400 grit diamond pad but even that wasn’t having much effect so in the end I had to cut back the surface using a 100 grit pad moving up to 200 grit, then 400 before finally stopping at 800. To lubricate the process you need to use a little water and then rinse away the resultant soil after each pad. If this was a polished stone surface I would have continued with finer and finer grits to restore the surface polish however these tiles were rough limestone and I needed to leave it as near to how it should be.

Black Limestone Tile Grinded with Diamond Pads in Wimbledon
Once all the Limestone had been stripped back the stone turned an uninviting grey colour, so to bring it back to black I applied two coats of Tile Doctor Stone Oil which enhanced the colour.

Black Limestone Tile Adding Stone Oil in Wimbledon

Sealing Black Limestone Tiles

I left the floor overnight to allow the Stone Oil to dry out and then returned to seal the Limestone using two coats of Tile Doctor Colour Grow which is an impregnating sealer that enhances the colour in the stone and will protect it from staining going forward.

Black Limestone Grinded and sealed in Wimbledon
When the customer saw the final result she was overwhelmed and said she felt like crying with relief, because the floor now looked how she had imagined it to be. It was a great feeling for me to know that I had solved the problems for her.

Black Limestone Before and After in Wimbledon
 

Restoring Black Limestone Tiled Floor in Wimbledon

Black Limestone Floor installation problems resolved in Wimbledon Read More »

Polished Limestone After Cleaning in Leatherhead

Limestone Tiled Floor Cleaning in Leatherhead

1 Comment / Epsom Tile Cleaning, Limestone Tile Cleaning and Polishing, Work History /

I was asked by a customer in Leatherhead, Surrey to clean the Limestone tiled floors that had been installed throughout the ground floor of his house. I popped round to take a look at the job and could see that the Limestone tile and grout was quite dirty; it was clear that the sealer had broken down and dirt was now becoming ingrained into the stone and grout.
The floor would need to be burnished and re-sealed to get it back to its original condition and so I provided a quote to do the work. The quote was accepted although he did ask if I could provide a couple of references from former clients; there are over 70 testimonials from past customers on my website so this was not a problem and I was happy to do so. Once he had received the references he called to book me in.

Polished Limestone Before Cleaning in Leatherhead Polished Limestone Before Cleaning in Leatherhead

Cleaning Limestone Floor Tiles

My first job was to protect the walls and units before scrubbing the first area with a hot solution of Tile Doctor Pro-Clean using a rotary machine fitted with a brush head attachment. This process lifted the dirt out from the grout, the surface and any holes.

The floor was then rinsed thoroughly with clean water to remove any cleaning products and I then proceeded to burnish the Limestone tiles using a set of four burnishing pads system fitted to a rotary machine. You start with a coarse pad lubricated with a little water and this removes any remaining sealers and ingrained dirt from the stone. Any slurry is then rinsed away and you move onto the remaining medium, fine and superfine polishing pads which bring back the polished surface, again each pad needs to be lubricated with a little water which needs to be rinsed away after each pad. It was a large area so as you can imagine this took some time to apply this process to the entire floor so I focused on the Kitchen then first day and came back the second day to work on the hallway and utility room.

Sealing Limestone Floor Tiles

On the third day I came back to seal the floors using two coats of Tile Doctor Colour Grow which is a colour enhancing penetrating sealer that brings out the different shades of colour in Limestone and is designed to provide maximum stain protection on natural stone floors. The last step was to buff the floor to a nice shine with a rotary machine fitted with a white pad.

Polished Limestone After Cleaning in Leatherhead Polished Limestone After Cleaning in Leatherhead

The grout is now back to its original grey as opposed to black and the Limestone look new again, needless to say the customer was really pleased with the finish and has since recommended my services to other friends.

Polished Limestone After Cleaning in Leatherhead
 

Limestone Floor, Cleaned, Scrubbed, Polished and Sealed in Leatherhead

Limestone Tiled Floor Cleaning in Leatherhead Read More »

Honed Travertine Kensington Before and After

Honed Travertine Tiled Floor Cleaned and Sealed in Kensington

1 Comment / Battersea Tile Cleaning, Travertine Tile Cleaning, Work History /

I was asked to clean and reseal this Honed Travertine flooring in Kensington, London which ran through the ground floor area and to a small area in the basement. The floor had been laid nine years prior and had only had regular washing by the housekeeper and was now overdue a deep clean and re-seal..

Honed Travertine Kensington Before Cleaning Honed Travertine Kensington Before Cleaning

Deep Cleaning Travertine Tiles

It was a large area so it was necessary to work in sections which had the added complication of having to move the customer’s furniture around.

With each area I scrubbed the floor with a rotary machine fitted with a medium brush head and a hot 3:1 dilution of Tile Doctor Pro-Clean. I scrubbed it in and left it for 10 minutes before scrubbing again then vacuumed it away with a wet vac. I then checked all the grout lines were clean in case the brush head had missed any.

Next I fitted a pad holder to the rotary machine and using a medium grade burnishing pad scrubbed the area again, I then followed this up with the fine grade pad to build a nice sheen on the stone to match the customers’ requirements.

Honed Travertine Kensington After Cleaning
During the cleaning process it became evident that some of the Travertine tiles had holes in them, it’s possible they had been this way when supplied but it’s also possible that they had been worn through by the use of an acidic cleaning solution. so after once the tiles were cleaned and polished I filled in the holes with a matching filler.

Honed Travertine Kensington After Cleaning

Sealing Travertine Floor Tiles

The next step was to seal the Travertine to protect it from future staining and for this I used Tile Doctor Colour Grow which is a colour enhancing impregnating sealer that occupies the pores in the stone. In total I had to use three coats on sealer on the stone due to its porosity. I finally buffed the floor using a white soft buffing pad; this was to take off any seal left sitting on the surface of the stone and helps to work it in.

Honed Travertine Kensington After Sealing
In total it took four days to do this job and the customer was really happy with the result and left a very nice testimonial on the Tile Doctor website.

Honed Travertine Kensington Before and After
 

Travertine Floor Cleaned, Polished and Sealed in Kensington

Honed Travertine Tiled Floor Cleaned and Sealed in Kensington Read More »

Removing wax from a Terracotta tiled floor in Battersea

Removing wax from a Terracotta tiled floor in Battersea

1 Comment / Battersea Tile Cleaning, Terracotta Tile Cleaning, Work History /

Traditionally Terracotta tiled floors were protected using wax and this floor at a house in Battersea had been protected with a number of treatments including wax and other sealers, without a full history of the floor it’s not that easy to tell what you’re dealing with. Wax isn’t an ideal sealer as it can scratch easily which allows dirt to become ingrained and modern sealers outperform it in many ways.

Terracotta Tiles Before Cleaning in Battersea Terracotta Tiles Before Cleaning in Battersea

Cleaning Terracotta Tile

To get the floor clean I started the job using a strong dilution of Tile Doctor Pro-Clean which was scrubbed into the tiles using a rotary machine fitted with a scrubbing pad. Pro-Clean is a heavy duty alkaline cleaner which can be used to remove wax residues and old sealants and being an alkaline product its safe for use on tiles. Unfortunately because there was so much old sealer and wax in the tiles it took several attempts to get the tiles clean and in the end it took five days to get them back to their natural state. Once this was done the floor was given a thorough rinse to remove any trace of cleaning product and allowed left to dry.

Terracotta Tiles Before and After Cleaning in Battersea

Sealing Terracotta Tile

Tiles need to be bone dry before sealing or it will upset the final effect of the sealer and in the end I had to wait three weeks before I was happy to start sealing, Terracotta being clay based is very porous so this is not that unusual.

To seal the tiles I used eight coats of Tile Doctor Seal and Go which is a water based topical sealer which leaves no smell as it dries and also adds a nice sheen to the floor, eight coats is not unusual for Terracotta again due to its porosity.

Terracotta Tiles After Sealing in Battersea Terracotta Tiles After Sealing in Battersea

The customer could not believe the transformation and even though it took a lot longer than first anticipated he was really pleased, especially when he got his invoice, because he was expecting to be charged for the extra time it took to complete. I told him that once I had given him my price I do not add extras.

Terracotta Tiles Before and After Sealing in Battersea
 

Terracotta Floor Cleaned and Sealed in Surrey

Removing wax from a Terracotta tiled floor in Battersea Read More »

Marble tiled floor Westminster water test

Marble Bathroom Refreshed in Westminster

1 Comment / Battersea Tile Cleaning, Marble Tile Cleaning, Work History /

You may recall a job I wrote about earlier in the year concerning a Limestone tiled floor in Westminster well I’m please to say the owner of that property was so pleased with my workmanship that I was asked back to maintain the Marble tiled bathroom which included a sink unit.

Maintaining Marble Tiles

Normally with polished stone it’s necessary to burnish the floor however in this case the tiles were in good condition with no scratches in the polish, there were a few spots and marks on the tile that needed to come off and they had lost some shine however a full burnish would not be necessary.

Marble tiled floor Westminster Marks before cleaning Marble tiled floor Westminster Marks before cleaning

To remove the spots and marks I treated them first with a solution of Tile Doctor Pro-Clean diluted 4:1 with hot water. I then scrubbed them using a red buffing pad on my rotary floor machine, which took the marks away from the stone. Next I used a medium burnishing pad with a little water and followed with the fine pad and finally the ultra-fine burnishing pad to restore the shine and polish. I offered to build-up a durable polish with Tile Doctor Shine Powder however the owner was happy with the finish that had been achieved.

Marble tiled floor Westminster Marks after cleaning Marble tiled floor Westminster Marks after cleaning

Sealing Marble Tiles

Once the tiles were dry I sealed them using Tile Doctor Colour Grow which is an impregnating sealer which occupies the pores of the stone and also enhances its natural colours in the process.

Marble tiled floor Westminster after sealing Marble tiled sink unit Westminster After Cleaning

Once the floor had been done I carried out the same process on the Marble sink unit using small six inch pads with a hand polisher. All went well and as you can see from the water bubble test in the photograph below the floor is now fully sealed however there is more work to be done elsewhere in the house and the owner has now booked me in to clean all of the carpets.

Marble tiled floor Westminster water test
 

Marble Tile Cleaning and Polishing in Westminster, London

Marble Bathroom Refreshed in Westminster Read More »

Marble Tiles Indian Restaurant South Croydon Before and After

Marble Tiled Floor Cleaned and Polished in South Croydon Restaurant

1 Comment / Croydon Tile Cleaning, Marble Tile Cleaning, Work History /

I was asked by my local Indian restaurant in South Croydon if I could improve the look of their marble tiles in the reception area of the restaurant. They had been laid several years ago and now the sealer was failing and dirt was becoming ingrained in the tile and especially the grout which had gone dark.

Marble Tiles Indian Restaurant South Croydon Before Marble Tiles Indian Restaurant South Croydon Before

Marble Tile and Grout Cleaning

To get the grout clean and remove the surface dirt we started with the application of a coarse grade diamond encrusted burnishing pad, the pad is used in conjunction with a little water which helps lubricate the process and it effectively cuts back the layer of grime from the surface. Rotary pads do struggle to reach into the grout lines so a medium dilution of Tile Doctor Pro-Clean which is a heavy duty tile and grout cleaner that’s safe to use on natural stone and grout was also scrubbed into the grout by hand using a stiff brush.

Marble Tiles Indian Restaurant South Croydon During Cleaning Marble Tiles Indian Restaurant South Croydon During Cleaning

The floor was then rinsed to remove the now dirty water and cleaning solution and we moved on to polishing the floor using a medium grade, fine and then super fine pads to build the surface shine backup. The floor was rinsed with water in-between each pad and then dried out as thoroughly as possible using large air movers.

Sealing Marble Floor Tiles

Normally I would have finished off with the application of Tile Doctor Shine Powder to give it a mirror like finish but the owner was happy with the way it looked and so once the floor had dried we moved onto sealing it with two coats of Tile Doctor Colour Grow which is an impregnating sealer that works from the inside by occupying the pores within the stone, it also enhance the colours within natural stone.

Marble Tiles Indian Restaurant South Croydon After Cleaning Marble Tiles Indian Restaurant South Croydon After Cleaning

The owner was over the moon with the results and has now engaged us to maintain the floor on a regular basis.

Marble Tiles Indian Restaurant South Croydon Before and After Marble Tiles Indian Restaurant South Croydon Before and After

 

Cleaning and Polishing a Marble Tiled floor in a Surrey Restaurant

Marble Tiled Floor Cleaned and Polished in South Croydon Restaurant Read More »

Limescale removed from Marble Shower Tiles Addlestone

Removing Limescale from Marble Shower Tiles in Addlestone

1 Comment / Epsom Tile Cleaning, Marble Tile Cleaning, Work History /

I recently went the assistance of a home owner in Addlestone, Surrey who had damaged the surface of the Marble tiles in her shower by attempting to remove Limescale using a well-known household cleaning product, which unfortunately due to its acidic formula actually made the problem worse and etched the tiles.

Limescale on Marble Shower Tiles Addlestone

Burnishing Marble Shower Cubicle Tiles

To remove the etching and Limescale from the Marble tiles the surface would need to be cut back and re-polished using diamond encrusted burnishing pads. For this job we used a set of six inch pads which are similar to the floor pads but smaller so they can be attached to a hand held machine and used on vertical surfaces.

To burnish the tiles a coarse pad is applied first lubricated with a little water and this removes surface deposits such as Limescale and in this case also the etching. The resultant residue is washed away and then you proceed on with the Medium, Fine and Very Fine polishing pads until the surface has been restored.

Sealing Marble Shower Tiles

Once I had finished applying the Very Fine pad I gave the tiles a thorough rinse and then dried them so they could be sealed for which I used a coat of Tile Doctor Colour Grow which is an impregnating sealer that gets into the pores of the stone enhancing the natural colours in the process.

Limescale removed from Marble Shower Tiles Addlestone
The owner was really grateful because she was thinking that they would need to be replaced which as you can imagine would have been very expensive.

Etched Marble Walls Tiles Burnished and Polished in Addlestone, Surrey

Removing Limescale from Marble Shower Tiles in Addlestone Read More »

Removing Limescale from Porcelain Swimming Pool tiles in Oxshott

Removing Limescale from Porcelain Swimming Pool tiles in Oxshott

1 Comment / Epsom Tile Cleaning, Grout Cleaning, Porcelain Tile Cleaning, Work History /

The owner of this swimming pool at a large residence in the suburban village of Oxshott had put the property on the market and naturally wanted the pool area to look its best. The pool was surrounded by Porcelain tiles which are very resilient and generally a good choice for a swimming pool surround, additionally the slate effect tiles in this post had a riven surface which would make them less slippery than the highly polished variety. The chemicals used in swimming pools however are quite strong and I suspect this has contributed to the build-up of Limescale on the surface of the tiles.

Cleaning Porcelain Tiles

The first job was to give the tiles a deep clean and this was done by scrubbing in Tile Doctor Pro-Clean diluted 1 part cleaner to four parts hot water using a black scrubbing pad fitted to a rotary machine. Once scrubbed the soiled cleaning solution was removed using a wet vacuum and the tiles given a thorough rinse. There were a lot of tiles to clean and naturally care has to be taken to avoid getting any cleaning solution in the pool.

Porcelain Pool Surround Oxshott Before Cleaning Porcelain Pool Surround Oxshott Before Cleaning

After rinsing the tiles were dried with the assistance of an air mover so we could get an idea of what other remedial work would be required and in this case it became clear where the areas with Limescale staining were.

Porcelain Pool Surround Oxshott During Cleaning

Removing Limescale from Porcelain Tiles

To remove the Limescale each stain was spot treated using Tile Doctor Grout Clean-up which is a strong acid based cleaning product normally used to remove grout smears from tiles but also equally useful at dealing with mineral deposits such as Limescale. You have to be very careful with acids on tiles, especially natural stone so once it had done its job the tiles were thoroughly rinsed and the whole floor rinsed again once we have completed everything.

Porcelain Pool Surround Oxshott After Cleaning Porcelain Pool Surround Oxshott After Cleaning

When we had finished the client couldn’t believe the transformation we have managed to achieve.

Porcelain Pool Surround Oxshott Before And After
 

Deep cleaning Porcelain pool surround tiles in OxShott, Surrey

Removing Limescale from Porcelain Swimming Pool tiles in Oxshott Read More »

Limestone tiled floor Westminster Before and After

Limestone Kitchen and Hallway floor Cleaned and Sealed in Westminster

1 Comment / Battersea Tile Cleaning, Limestone Tile Cleaning and Polishing, Work History /

Details below of a Limestone Tiled Floor that I recently cleaned and sealed at a residence in Westminster in the heart of London. The tiles were not looking the best and after deciding to do something about the owner searched the internet for a solution saw my website and emailed to book me in 2 months before.

Limestone tiled floor Westminster Before Cleaning Limestone tiled floor Westminster Before Cleaning

Cleaning a Limestone Tiled Floor

I arrived on site at the agreed time and decided to scrub the floor first using a hot 4:1 dilution of Tile Doctor Pro-Clean which is a heavy duty alkaline cleaning product specially designed for cleaning stone floors. This was left to dwell for a while and then agitated using a rotary machine fitted medium brush head. The soiled solution was then removed using a wet vacuum and the floor was then rinsed down with fresh clean water. Doing this removed a lot of dirt, that was ingrained in the stone, and by using the brush it got into the recesses of the grout, once I had done this the floor looked great but I could see it would still needed to be burnished to restore the original appearance.

Limestone tiled floor Westminster Initial Clean Limestone tiled floor Westminster Initial Clean

Burnishing Limestone Floor Tiles

We used a set of diamond encrusted Burnishing Pads fitted to a rotary buffing machine to polish the Limestone floor. These pads are ideal for restoring the shine on hard stone surfaces such as Limestone, Travertine and Marble, the come in a set of four and you start with the Coarse pad together with plain water and this cuts through and removes surface grime and any surface seal. You then progress through the Medium, Fine and Superfine polishing pads one to achieve a high polish.

Sealing Limestone Tiles

The floor was left to dry and I returned a couple of days later to seal it using two coats of Tile Doctor Colour Grow which is a colour enhancing sealer that brings out the colours in natural stone, finally buffing the floor using a soft white buffing pad.

Limestone tiled floor Westminster After Cleaning Limestone tiled floor Westminster After Cleaning

The lady was really pleased with the result and left a nice testimonial on the tiled doctor website, she has also booked me in to sort out two bathroom floors (one Marble and one Limestone) and she has also booked me in to carry out the cleaning of all her carpets.

Limestone tiled floor Westminster Before and After
 

Limestone Tile Cleaning and Polishing in Westminster, London

Limestone Kitchen and Hallway floor Cleaned and Sealed in Westminster Read More »

Travertine floor Surbiton before after

Travertine Tiled Floor Diamond Polished in Surbiton

1 Comment / Travertine Tile Cleaning, Wimbledon Tile Cleaning, Work History /

I recently carried out a clean and diamond polish of a Travertine tiled floor in Surbiton for a customer who had been fed up with the floor since she and her husband had moved in 2 years ago. The floor was the last job on their list of things to be done and they wanted to make sure that it was done properly as unfortunately in the past they have fallen prey to unscrupulous tradesmen who had not lived up to expectations.

When I was asked to quote I explained what I would do and showed pictures of previous work, and also my Trustmark Accreditation. They had also researched my work through my website and through the work history where there are lots of examples of Travertine tiles I have worked on in the past. I received the work order the next day and booked the job in for three weeks after.

Travertine Floor Surbiton Before Travertine Floor Surbiton Before Marked

Stripping and Polishing Travertine Tiles

I arrived at the agreed date and time and was pleasantly surprised to see that they had put sheeting around all of their kitchen units and skirting so all I had to protect was the wooden flooring next to the travertine.

Travertine Floor Surbiton Before Cleaning Travertine Floor Surbiton Before Cleaning

My first job was to scrub the floors Using Tile Doctor Pro Clean to get rid of any ingrained dirt and clean the grout, the soiled cleaning solution was then removed using a wet vacuum and we moved onto burnishing the stone. This is done using a rotary scrubbing machine fitted with a coarse diamond encrusted burnishing pad and a little water began to strip off the old dirt and seal from the floor, the resulting slurry was then removed using a wet vacuum. The burnishing pads come in a set of four so once we were done with the coarse pad we moved on to the Medium pad which is the first step in the polishing process.

At this point I could see more work was required to improve the grout which was done using a combination of pressurised steam, more Tile Doctor Pro-Clean and a stiff brush. Once I had removed all the dirt and old seal from the grout I went on to the next stage of polishing and used the fine pad finally moving on to the extra fine pad to give the floor that extra deep shine.

Sealing Travertine Floor Tiles

Once the floor was dry we set about sealing it using two coats of Tile Doctor Colour Grow which is a colour enhancing impregnating sealer designed to provide maximum stain protection on natural stone floors whilst bringing out the colour in the stone. After the second coat was applied I waited 10 minutes before buffing any excess residue with a white buffing pad.

Travertine Floor Surbiton After Travertine Floor Surbiton After

I offered the customer the option of creating a higher shine by applying Tile Doctor Shine Powder to give it a mirror polish but she declined as she was more than happy with the finish. Overall the floor came out really well and I found it quite a humbling experience as she was constantly saying thank you due to the fact that she had been messed about by previous contractors so was quite relieved to find someone who could actually do the job properly.

Travertine Floor Cleaned, Polished and Sealed in Surbiton

Travertine Tiled Floor Diamond Polished in Surbiton Read More »

Victorian Tiled Floor Balham Before and After

Restoring a Victorian Tiled floor hidden under Carpet in Balham

1 Comment / Clapham Tile Cleaning, Victorian Tile Cleaning, Work History /

This post is from a house in Balham where the owner was doing some renovation work and after deciding to change the flooring in the hallway they discovered an original Victorian tiled floor. They planned to restore the floor unfortunately however their builders did not listen and didn’t bother to put down any protection when decorating leaving it in a worse condition than when they found it.

Victorian Tiled Floor Balham Before Cleaning Victorian Tiled Floor Balham Before Cleaning

Cleaning the Victorian Tiled Floor

To initially clean the floor I put down a 50/50 mixture of Tile Doctor Pro-Clean and Nanotech Ultraclean diluted with four parts water; this creates a powerful alkaline cleaner that is safe to use on tiles and contains tiny abrasive particles to cut through the grime. This solution was left to dwell on the tile for twenty minutes before being agitated using a rotary machine fitted with a black scrubbing pad. This action did well to deep clean the tiles and remove dirt but there was still plenty of other problems to deal with including paint from the decorating and glue from the carpet.

To remove the glue and paint I treated the surface with Tile Doctor Remove and Go which as its name suggest is designed to remove coatings from the surface of tiles without damaging them. Working in sections the product was left to dwell for forty minutes on the surface of the tile before being worked in by hand into the glue and paint. Once it had all been removed I gave the whole floor a scrub with Grout Clean-Up to remove grout from the surface of the tile and this brightened up the colours. Last step was to give the floor a thorough rinse down using clean water, this is quite important and you need to ensure any trace of product has been removed before sealing. The water was removed using a wet vacuum which literally sucks the water off the floor and reduces drying times, the floor was still fairly damp at this stage so we called it a day leaving an air blower in place to help the floor to dry overnight.

Sealing Victorian Tiles

When I came back the next day I decided to seal the tiles using Tile Doctor Colour Grow which is an impregnating sealer that penetrates into the pores of the tile blocking any dirt from getting in and making the tiles easier to clean.

Victorian Tiled Floor Balham After Cleaning Victorian Tiled Floor Balham After Cleaning

Two coats were sufficient and Colour Grow also brings out the colour in the tile improving its look, certainly my customer thought so as all they could say was:

“AMAZING I didn’t think it was possible to get like this.”

Victorian Tiled Floor Balham Before and After
 

Victorian Floor Restoration in Balham

Restoring a Victorian Tiled floor hidden under Carpet in Balham Read More »

Limestone Tiled Floor Kensington Before and After Cleaning

Limestone Tiled Kitchen Floor Cleaned and Polished in Knightsbridge

1 Comment / Battersea Tile Cleaning, Limestone Tile Cleaning and Polishing, Work History /

Details below of a Limestone Tiled Floor we cleaned and polished in the kitchen of a flat in Knightsbridge, the customers were waiting to move into their new home and the kitchen floor was dirty, especially after they had some new tiles fitted and looked out of place.

They had other companies in to quote but were not impressed by their knowledge of how to clean the floor, and one large London based company sent some people to do a test patch with completely inappropriate equipment and failed to make any difference at all. Sorting out natural stone floors is what we do for a living so and although I was unable to carry out a demo on this occasion I managed to get the job by answering all their questions in detail setting realistic expectations without promising the earth and showed them pictures from a portfolio of work we had done before.

Limestone Tiled Floor Kensington Before and After Cleaning

Stripping and Polishing Limestone Floor Tiles

Before starting to clean the floor we removed the plinths from the kitchen units and then using a rotary scrubbing machine fitted with a coarse diamond encrusted burnishing pad and a little water began to strip off the old dirt and seal from the floor, the resulting slurry was then removed using a wet vacuum.

The burnishing pads come in a set of four so once we were done with the coarse pad we moved on to the Medium and then Fine pads again with a little water until the floor was polished. The Next step was to use Tile Doctor Pro-Clean along the grout lines with a stiff brush to get the grout clean as well.

To bring up the polish on the Limestone tiles the last “Very Fine” pad was fitted to the rotary machine and run over the floor to buff it to a nice shine.

Limestone Tiled Floor Kensington Before and After Cleaning

Sealing Limestone Floor Tiles

Once the floor was dry we set about sealing it using two coats of Tile Doctor Colour Grow which is a colour enhancing sealer designed to provide maximum stain protection on natural stone floors whilst bringing out the colour in the stone, this was followed with a final buff with a soft white pad.

Limestone Tiled Floor Kensington Before and After Cleaning
The customers were really pleased with the finish and pleased that they chose a Tile Doctor to do the work. I should mention that they were not expecting to be able to see the new and the old tiles blend and were really happy that we could achieve this for them.

Limestone Floor Cleaned, Polished and Sealed in Knightsbridge

Limestone Tiled Kitchen Floor Cleaned and Polished in Knightsbridge Read More »

Limestone Floor Fulham Before and After

Limestone Tiled Floor Cleaned and Polished in Fulham

1 Comment / Limestone Tile Cleaning and Polishing, Putney Tile Cleaning, Work History /

This Limestone tiled floor was installed at a property in Fulham, I was asked round to quote for cleaning the floor and whilst I was there I did a patch test. The test worked very well and the owner couldn’t believe that the grout was actually white not dark grey.

Limestone Floor Fulham Grout Cleaning 1

Cleaning Polished Limestone Floor Tiles

The first step was to give the floor a quick sweep to remove any surface grit etc. Before starting the burnishing process which we use on hard stone surfaces such as polished Limestone to clean and bring up the shine on the floor. The burnishing pads and encrusted with diamonds and come in a pack of four consisting of Coarse, Medium, Fine and Very Fine 17” pads. I started with a coarse pad which removes sealers and dirt from the floor, a little water is added to lubricate the process.

Limestone Floor Fulham Before Cleaning Zoom 2 Limestone Floor Fulham Before Cleaning 3

Once we had finished with the coarse pad the grout was cleaned up using Tile Doctor Pro-Clean diluted 1 part cleaner to 4 parts water. The solution was then scrubbed into the grout with a stiff hand brush until it was clean. The floor was then rinsed with clean water to remove any cleaning products and we then continued with the remaining burnishing pads applied in order with Medium, Fine and Very Fine until the floor was thoroughly cleaned and polished. We left for the day at this point to allow the tiles to dry overnight.

Limestone Floor Fulham Before Sealing 4

Sealing Limestone Floor Tiles

The following day we returned to seal the floor using two coats of Tile Doctor Colour Grow which is a great sealer for natural stone such as Limestone as it works to lift the colours out of the stone. The last step was to buff the floor to a nice shine with a rotary machine fitted with a white polishing pad.

Limestone Floor Fulham After Cleaning Sealing 5 Limestone Floor Fulham After Cleaning Sealing 6

The customer was really pleased with the result and couldn’t believe that the floor could look so good.

Limestone Floor Fulham Before and After
 

Limestone Floor, Cleaned, Scrubbed, Polished and Sealed in Fulham

Limestone Tiled Floor Cleaned and Polished in Fulham Read More »

Old Encaustic Floor Fulham Before and after Restoration

Old Encaustic Tiled Floor Restored in Fulham

1 Comment / Encaustic Cement Tile Cleaning, Putney Tile Cleaning, Work History /

I had an inquiry from a client in Fulham, who was representing the residents of an old building. The building had recently undergone redecoration and in the hallway, they had removed a thirty year old carpet to discover an original encaustic tiled floor underneath which turned out to be 102 years old.

Old Encaustic Floor Fulham Before Cleaning 1 Old Encaustic Floor Fulham Before Cleaning 2

As you can see from the photographs the floor was extremely dirty and covered in lots of glue and paint from the carpet and decorations. Naturally they were keen to have it restored and brought back to life. Given the condition of the tile and the age I to set their expectations and told them that although I was confident of making a big difference to the floor I couldn’t give any guarantees. I gave them my quotation and although it was slighter higher than what they had I mind, it was still less than other quotations that they had received and were also considering the option of replacing the carpet.

After a couple of days I received a call asking me to go ahead with the work and I booked it in.

Encaustic Tiled Floor Cleaning

My approach to the job was to initially spray a mixture of Tile Doctor Remove and Go combined with Tile Doctor NanoTech UltraClean which creates a powerful tile safe coatings remover with tiny abrasive particles that aid the cleaning process.

I left this to dwell on the tile for about fifteen minutes before scrubbing it in using a black scrubbing pad on my rotary machine. This approach removed some glue and a lot of old grime so I then sprayed down more Remove and Go and also used a steamer to loosen the remaining glue and paint. This process was repeated a section at a time until at the end of the day I gave the whole are a thorough rinse before packing away my equipment and leaving it to dry.

Encaustic Tiled Floor Sealing

I returned three days later and carried out a test with my moisture meter to make sure that the floor was dry enough to seal. The meter confirmed it was dry so I then sealed the floor using two coats of Tile Doctor Colour Grow which is an impregnating sealer that really brings out the colour in the tiles.

Old Encaustic Floor Fulham After Cleaning 3 Old Encaustic Floor Fulham After Cleaning 4

And as you can see the floor is transformed and now I have some happy residents who are really pleased that they opted to have the old floor cleaned instead of replacing the carpet. Not to mention that restoring such an original feature has probably added value to their investment as well.

Old Encaustic Floor Fulham Before and after Restoration 5

Original Encaustic Tiled floor cleaned and restored in Fulham

Old Encaustic Tiled Floor Restored in Fulham Read More »

Marble Tiled Floor Oxshott

300m2 Marble Tiled Floor Cleaned and Polished in Oxshott

1 Comment / Epsom Tile Cleaning, Marble Tile Cleaning, Work History /

Following on from a referral from a Property Management company I paid a visit it to this palatial property in Oxshott which had approximately 300m2 of Marble tiled flooring that they wanted cleaning and re-polishing, my initial quotation to do this mechanically was too high so I offered an alternative using diamond encrusted burnishing pads which reduced the cost significantly. I didn’t receive an answer so I thought that was the end of it however five months later I got an email asking me to carry out the works.

Marble Tiled Floor Oxshott Marble Tiled Floor Oxshott

Marble Tiled Floor Polishing

This was a very large area so we had two men working with burnishing pads in 10 metre sections. The pads come in a set of four; you start with the coarse pad together with a little water and this cuts through and removes surface grime and any surface seal. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish.

Marble Tiled Floor Oxshott Marble Tiled Floor Oxshot

Fortunately there were not many stains and the ones that were there came out quite easily. When we had completed a room using this system we then applied Tile doctor Shine powder which is a crystallising power worked into the floor using a white buffing pad and a little water; it adds an extra level of deep shine to the marble floor giving it that extra wow factor together with a tough durable finish, we did this working 1 m2 at a time.

This whole process took five days to complete and when we had finished the client came to inspect it with the homeowner. She was delighted with the final finish and has said that she will be recommending us to all her friends and clients. This is also great for the property manager because it has given him a good reputation for providing a trustworthy and highly skilled contractor for the works. Also he has promised us further work from his other clients including a job to carry out the external stone cleaning works for the same client.

Marble Tiled Floor Oxshott Marble Tiled Floor Oxshott

 

Cleaning and Polishing a Large Marble Tiled floor in Oxshott, Surrey

300m2 Marble Tiled Floor Cleaned and Polished in Oxshott Read More »

Anti-slip Porcelain Tile Wimbledon

Applying Anti Slip Treatment to Porcelain tiles in Wimbledon Office

1 Comment / Porcelain Tile Cleaning, Wimbledon Tile Cleaning, Work History /

We were contacted by a builder who had recently laid Porcelain Tiles in an office reception in Wimbledon. Although he has laid this type of tile in various art galleries around London without problem, in this particular lobby which is situated next to a shopping centre the tiles were extremely slippery and the facilities manager wanted the tiles changed at the expense of the builder.

Antislip Application Porcelain Tile Wimbledon
Obviously this would have been an expensive option and so the builder contacted Tile Doctor for help. Initially he had considered having a member of his team apply the treatment however he realised that as a Tile Doctor applicator we had been trained to apply the treatment properly and this gave the facilities manager confidence it would have been applied to the correct standard so we were awarded the work and asked to carry it out on a Sunday when the building would be empty.

Antislip Application Porcelain Tile Wimbledon

Applying the Anti-Slip Treatment

We arrived at the agreed time and were let in by the shopping centre security team. The area we were treating was around 25m2 so decided to work in 5m2 sections first cleaning the tile using the first stage Ant Slip product worked into the tile with a rotary floor machine fitted with a polypropylene brush head and then removing with a wet vacuum followed by rinsing with clean water.

We carried on with this process until the whole floor was done and let it dry before going onto the next stage to apply the Tile Doctor Anti slip (stage two) and leaving for between 3 to 5 minutes before applying the stage three which locks in the Anti Slip.

Antislip Porcelain Tile Wimbledon
The Anti Slip product is invisible to the eye however it’s very easy to test it’s been applied, all you need to do is wet the tile as the product only activates when it’s wet.

Antislip Porcelain Tile Wimbledon
When we had finished the whole floor we then tested it again just to make sure that everything worked well we cleared away all the tools making sure we left the area tidy and safe and locked the building up.

The Job took us one night and the customer is now recommending us to all other sites that have had these tiles fitted.

Preventing slips and trips on Porcelain Tile in a Wimbledon Office

Applying Anti Slip Treatment to Porcelain tiles in Wimbledon Office Read More »

Victorian Tiled Floor Balham After Cleaning

Victorian Tiled Hallway Restoration in Balham

1 Comment / Brixton Tile Cleaning, Victorian Tile Cleaning, Work History /

Set of photographs here from a Victorian Tiled floor for a customer in Balham, South London. They had found the floor under an old carpet, and wanted to restore it. Unfortunately their builders did not listen and didn’t bother to put down any protection when they painted, as a result there was paint everywhere, I’ve include a detailed photograph below so you can see for yourself what a state the floor was in.

Victorian Tiled Floor Balham Before Cleaning Victorian Tiled Floor Balham Before Cleaning

Cleaning the Victorian Floor Tiles

Initially the floor was cleaned using a dilution of Tile Doctor Pro-Clean mixed 50:50 with NanoTech UltraClean which had been left to dwell for 20 minutes before being agitated using a rotary machine fitted with a buffing pad. I used a wet vacuum to remove the dirty cleaning solution and then realising something more powerful would be required to shift the stubborn stains and paint marks. To rectify this I applied a Tile Doctor Remove and Go which is a coatings remover and left it to dwell on the Victorian tile for forty minutes before applying plenty of elbow grease. This did the trick to remove the paint and glue etc. so I worked across the floor in sections applying the same treatment until the floor was completely clean.

Once it had all been removed I gave the whole floor a scrub with Tile Doctor Grout Clean-Up and this brightened up the colours and finally I gave the floor a very thorough rinse with clean water to remove any remaining cleaning product that might have an adverse effect on the sealer. I left the floor to dry over the weekend and returned on the following Monday to seal it, but first I carried out a couple of repairs because some of the tiles were loose so I reset them in cement.

Sealing Victorian Tiled Floor tiles

On my return I sealed the floor using two coats of Tile Doctor Colour Grow which is a penetrating sealer that provides maximum stain protection whilst bringing out the colour in the stone.

Victorian Tiled Floor Balham After Cleaning Victorian Tiled Floor Balham After Cleaning

All the customer could say was AMAZING I didn’t think it was possible to get like this.

Victorian Floor Cleaned and Sealed in Balham, South London

Victorian Tiled Hallway Restoration in Balham Read More »

Quarry Tile Cleaning Ashtead before after

Quarry Tiled Floor Cleaned and Sealed in Ashtead

1 Comment / Epsom Tile Cleaning, Quarry Tile Cleaning, Work History /

A while ago I was asked to quote to clean up an old quarry tiled floor in a converted barn in Ashtead. Whilst I was there I carried out a test patch for the lady to show what the results would be; she had said that if she wasn’t satisfied she was going to replace the floor so she must have met her expectations as a week later we were given the go ahead to carry out the work.

Quarry Tile Cleaning Ashtead before
 

Quarry Tile Cleaning Ashtead before2

Cleaning Hallway Quarry Tiles

Fortunately for us they had recently removed the old kitchen and scheduled us after to clean the quarry tiles before completing the decorating and refitting a new kitchen. We cleaned the tiles using a mixture of Tile Doctor Pro-Clean diluted 1:4 parts with water and Nanotech Ultraclean which adds tiny abrasive particles into the cleaning solution. Normally I would work this into the floor using a black scrubbing pad however the floor was very uneven so I used a medium nylon brush on my rotary machine instead, this had the added advantage of reaching into the grout as well. I should mention we thoroughly rinsed the floor as we went along using a wet vacuum to remove the soiled solution. It took two of us two days to scrub the areas that had to be done and we had a blower running to help dry out the floor.

Sealing Hallway Quarry Tiles

We returned three days later and carried out moisture test to ensure the floors were dry and ready to be sealed. The Quarry tiles were then sealed them with five coats of Tile Doctor Colour Grow which is an impregnating sealer that reaches into the pores of the tile and lifts the natural colours. The owner was extremely happy with the floor and couldn’t wait to have her new kitchen installed to see how it would look.

Quarry Tile Cleaning Ashtead after
 

Quarry Tile Cleaning Ashtead after2
 

Old Quarry Tiles Restored in Ashtead, Surrey

Quarry Tiled Floor Cleaned and Sealed in Ashtead Read More »

Applying Anti Slip to Shiny Slippery Porcelain Tiles in Ashtead

Applying Ant-Slip to a shiny Porcelain Patio

1 Comment / Epsom Tile Cleaning, Porcelain Tile Cleaning, Work History /

Last week we were asked to carry out a demonstration of our AntiSlip Treatment for a lady in Ashtead Surrey. She has white shiny Porcelain tiles laid on a patio area and when they get wet they are really slippery and dangerous and she was especially concerned about young children hurting themselves. We carried out a test patch for her and asked her to see if she could slip, not only did she try, but her gran and mother-in-law also tried and were extremely impressed. I left her with our quotation so she could discuss it with her husband. The next day I received a call asking me to go ahead and carry out the works.

Applying the Anti-Slip Solution

When applying this treatment it is vital that you follow all the guidelines and times for the different types of stone. It is a 3 stage application, the first is the primer which is mixed 4 : 1 which we scrubbed into small areas of about 6m2 at a time, when scrubbing we used a brush head on our rotary scrubbing machine which has the added advantage of cleaning the tiles.

Shiny Slippery Porcelain Tiles in Ashtead26
After about 5 minutes of scrubbing using a scrubbing pad we then vacuumed it all and left the tiles to dry and because we were outside in the sun it didn’t take long to dry. The next stage is to apply the Antislip treatment and for this we used a flat mop and for these type of tiles we needed to leave it to dwell for between 3 and 5 minutes, but we had to make sure that it did not dry in.

After the dwell time the 3rd stage is to scrub in another solution of the primer, but this time it locks in the Antislip. When you are scrubbing this stage you can feel the treatment working. Once we have completed this stage we vacuum it all up then rinse the area with fresh water to remove any residues.

Applying Anti Slip to Shiny Slippery Porcelain Tiles in Ashtead33
The complete area was around 50m2 and luckily the treatment package covered this area. In all the application took two of us around five hours to complete and after clearing our equipment away we then put all the garden furniture back in place.

We returned the next day because the customer also asked us to clean their driveway and the patio area was wet because of rain, but it was great to walk on and I did not slip at all.

Shiny Slippery Porcelain Tiles in Ashtead41
The customer was really happy, because if the treatment hadn’t worked her only other option would have been to rip up the tiles and replace them at a cost of thousands and to make things even better for her, this treatment will last around 4 years before she needs to have it re-applied.

Preventing slips and trips on shiny porcelain patio tiles

Applying Ant-Slip to a shiny Porcelain Patio Read More »

Balham Slate Floor Before After Cleaning

Slate Tiled Floor restored to a natural finish in Balham, South London

1 Comment / Battersea Tile Cleaning, Slate Tile Cleaning, Work History /

This beautiful slate tiled floor installed in the kitchen and hallway of a house in Balham London; I was asked by the owner if we could restore the floor following some work that had been carried out by a builder who had failed in his attempts to remove the old seal. To instill confidence that we could complete the work we carried out a demonstration on a small test area which was enough to prove that money would not be wasted and we were booked for the job, we even agreed to clean the floor on Sunday and seal it on the Monday so it would be ready in time for visitors who were due on the Wednesday.

Balham Slate Floor Before Balham Slate Floor Before

Cleaning slate Floor Tiles

We cleaned the floor using Tile Doctor Pro-clean which is an alkaline cleaner safe to use on natural stone such as Slate; it’s very good at removing general dirt, grime and even grease. Next step was to remove the remaining sealer using Tile doctor Remove & Go which was applied to a small area at a time. I scrubbed the product into the slate and left it on the surface for a further hour making sure not to let the area dry out which temporarily made it look really dark (see photo below). Finally I gave the floor a through rinse to make sure that no chemical remained on the stone before sealing and then left for the evening.

Balham Slate Floor After Cleaning

Sealing Slate Floor Tiles

The next day I checked the floor was dry using a moister meter which thankfully it was and then started to seal using two coats of Tile Doctor Colour Grow which is a colour enhancing sealer design to provide maximum stain protection on natural stone floors whilst bringing out the deep colour in the stone and providing a natural matt finish.

Balham Slate Floor After Sealing
My customer was really happy with the results and left a nice testimonial on the Tile Doctor website, she has also booked me in to clean her driveway next month.

Balham Slate Floor Before and After-

Slate Floor Cleaned, Stripped and Re-Sealed in Balham, South London

Slate Tiled Floor restored to a natural finish in Balham, South London Read More »

Limestone Tiled Floor Before and After

Limestone Tiled Kitchen Floor Cleaned and Polished in Fulham

1 Comment / Limestone Tile Cleaning and Polishing, Putney Tile Cleaning, Work History /

Beautiful Limestone tiled floor installed in the kitchen of a house in Fulham, the owner was keen to have the floor cleaned and re-polished; Limestone is a very hardwearing material but does need an occasional professional polish to keep it looking its best.

Limestone Tiled Floor Before Limestone Tiled Floor Before

Cleaning Limestone Floor Tiles

The floor was given a quick wash with Tile Doctor Neutral Cleaner in order to remove any surface grit and then cleaned using a set of Burnishing pads fitted to a rotary machine. The burnishing pads come in four different colours and you work your way through them starting off with the red pad with a little just water and then carry on with the white pad and then the yellow pad until the floor is thoroughly cleaned. Next step was to use Tile Doctor Pro-Clean along the grout lines with a stiff brush to get the grout clean as well. To bring up the polish on the Limestone tiles I used a green polishing pad which is the last in the set of the four burnishing pads.

Limestone Tiled Floor During Limestone Tiled Floor During

Sealing Limestone Floor Tiles

Once the floor was dry we set about sealing it using two coats of Tile Doctor Colour Grow which is a colour enhancing sealer designed to provide maximum stain protection on natural stone floors whilst bringing out the deep colour in the stone. The last step was to buff the floor to a nice shine with a rotary machine fitted with a white pad.

Limestone Tiled Floor After Limestone Tiled Floor After

This job took me two days, and the owner was extremely happy with the results and said it looked better than when it had first been laid eight years ago.

Limestone Tiled Floor Before and After
 

Limestone Floor Cleaned, Polished and Sealed in Fulham

Limestone Tiled Kitchen Floor Cleaned and Polished in Fulham Read More »

Marble Cloakroom WC Floor

Marble Wall and Floor Tile Refresh in Woking

1 Comment / Epsom Tile Cleaning, Marble Tile Cleaning, Work History /

This job was to refresh the Marble tile installed in a house in Woking. There were a number of different marble tiles installed on the wall and floor including two shower cubicles, a bathroom floor, a small cloakroom floor and the kitchen floor; the pictures below show before and after photographs for each job.

Cleaning a Marble Tile Shower Cubicle

I started with the shower cubicles using Tile Doctor Oxy-Pro which is a specific product for cleaning showers and comes with a spray attachment that mixes the cleaning agent with air making it lighter and helping it stick to vertical surfaces. This was left to dwell on the surface for a while and then the tiles were scrubbed before being rinsed down. This action not only cleaned the dirt and soap scum off the tile it also got rid of some mould that had started to grow.

Marble Shower Cublicle Marble Shower Cubicle

In one shower there was a build-up of limescale on the wall so to get rid of this I used a little Tile Doctor Grout Clean-up, this product is usually for removing grout smears from tile however it’s also good at removing most types of mineral deposits such as Limescale, you do have to be quick though as it’s an Acid based product I had to be quick and to thoroughly rinse because I didn’t want to damage the marble.

Marble Mosaic Bathroom floor tile cleaning

The next job was to tackle the bathroom floor which was tiled with small Marble mosaic tiles. A long time was spent cleaning and scrubbing the grout of this floor using a solution of Tile Doctor Pro-Clean mixed 50/50 with NanoTech Ultra-Clean to add tiny abrasive particles making a very effective tile cleaner. Again once the cleaning was finished cleaning the floor was rinsed thoroughly with clean water to remove any cleaning product.

Marble floor Tiles Before Cleaning Marble floor Tiles After Cleaning

Marble Kitchen floor tile cleaning

The next floor on the list was the kitchen floor, again all Marble tile; on this I used a rotary scrubbing machine fitted with a medium brush head and again a mixture of Pro-Clean and NanoTech UltraClean. The reason I used a brush head instead of a scrubbing pad is because it is a textured marble the brushes will get into the nooks and crannies, the grout was especially stained in this area and this is now much improved.

Marble Kitchen Floor Tile Before Marble Kitchen Floor Tile After

Marble Cloakroom floor cleaning

The last floor on the list to do was the cloakroom WC which was cleaned using the same method as on the bathroom floor described above using the Pro-Clean, NanoTech, and UltraClean mixture worked in with some elbow grease.

Marble Cloakroom- WC Floor
Once everything had been cleaned, and rinsed. I left it all to dry out overnight.

Sealing Marble Tiles

The following day before I sealed I checked everything just in case I had missed anything, but it was all okay. I sealed everything twice using Tile Doctor Colour Grow and checked that the tiles were properly sealed by doing a water test. When sealing you have to make sure that you don’t let the seal puddle so I buff the tiles with terry towelling and on the large areas I also buff the floors with a white buffing pad.

As you can imagine this was a very large job and when everything was eventually finished the lady said she was really happy and couldn’t believe how the tiles had come out, she even had her neighbours round to see how it all turned out and they were all suitably impressed.

Multiple Marble Tile Wall and Floor Tiles cleaned in Woking, Surrey

Marble Wall and Floor Tile Refresh in Woking Read More »

Sandstone Tiles Before After Cleaning

Resolving Sandstone Flagstone issues in Clapham

1 Comment / Clapham Tile Cleaning, Sandstone Tile Cleaning, Work History /

Details below of a Sandstone floor installed in the Kitchen of a house in Clapham, South London. The client had not been happy with the floor since it had been installed because the tiler hadn’t applied the seal correctly. The owner had also had a quote from a stonemason who had recommended grinding off the top later of stone. I explained that that would not be necessary and went on to explain the process to restore it. As it turns out my quote was £500 cheaper that the Stone mason but I was confident I could get as good a result and the customer could see I knew what I was talking about and gave the job to me.

Sandstone Tiles Before Cleaning Sandstone Tiles Before Cleaning

Sandstone Tile Cleaning

I began work on the floor using a coarse diamond burnishing pad fitted to a rotary scrubbing machine with a little water. I slowly scrubbed the floor in small areas and removed the old sealer from the whole tile. The next step was to tackle the grout which was done by applying Tile Doctor Pro-Clean worked in along the grout lines using a stiff grout cleaning brush. After this the pad was replaced on the rotary machine with a medium brush head and the floor was given a good scrub followed by rinsing thoroughly with fresh water.

At this stage it was evident that a couple of stubborn areas were still in need of attention due to the old sealer still being present so Tile Doctor Remove and Go was applied which is a strong sealer stripper and left to dwell for around 40 minutes before being scrubbed in and washed down again.

I can recommend a Wet Vacuum at this point as they are great at removing liquids from floors; at this point I left for the day to allow the floor to dry overnight ready for sealing the next day.

Sandstone Tile Sealing

Then next day when I returned I checked to make sure the floor was dry and ready to seal, there were a couple of little patches I needed to redo and once they were rinsed I dried them using my heat gun. I then sealed the floor with four coats of Tile Doctor Colour Grow and when the last coat had dried I demonstrated to the customer that it was fully sealed using a water test.

Sandstone Tiles After Cleaning Sandstone Tiles After Cleaning

The client was really pleased with the results and that I had saved him so much money and left the following comment on our feedback system.

“Bill was great and worked hard to restore and protect the floor. We’re very pleased. There has been some accidental damage outside which I’m happy we’ll sort.
Ian Blandford, Clapham”

Sandstone Tiles Before and After
 

Sandstone Tiled Floor Cleaned and Sealed in South London

Resolving Sandstone Flagstone issues in Clapham Read More »

Quarry Tile Cleaning After

Quarry tiled floor restoration in Grove Park, South London

1 Comment / Battersea Tile Cleaning, Quarry Tile Cleaning, Work History /

I recently completed this Quarry Tile restoration work for a young couple in Grove Park, South London. They were refurbishing their property and wanted to keep as much of the original features that they could. In the kitchen they had the original quarry tiles and had attempted to clean the floor themselves but we’re unsuccessful. I quoted for the job and took time to explain the process and which products I would be using.

They contacted me a couple of days later to let me know that they wanted me to carry out the work which was gratifying as I had put a lot of time into the quote. Turns out I got the job because they could see I knew what I was talking about giving them confidence I could do the work and another company had quoted twice the price I gave them and didn’t even pop round to carry out a site survey.

Quarry Tile Cleaning Before Quarry Tile Cleaning Before

Cleaning Hallway Quarry Tiles

I turned up at the agreed time and set about by cleaning the floor with a mixture of Tile Doctor Pro-Clean and NanoTech UltraClean which combine well together to produce a very effective cleaning product that is safe to use on tile and stone. The solution was worked into the floor using a rotary scrubbing machine fitted with a black scrubbing pad; after a while the soiled solution was removed using a wet vaccum and the floor was given a thorough rinse with clean water to see what I had left to deal with.

What was left was a mixture of paint, grease and sticky residues from old carpet tape and if that wasn’t enough there were limescale deposits. To tackle this a stronger product was required so I laid down Tile Doctor Remove and Go and left it to dwell on the tile for about 45 minutes which was sufficient to break down the stubborn marks and allow for them to be scrubbed out. Remove and Go is a strong coatings remover which as its name suggests should remove just about anything and with the exception of the limescale it lived up to its name.

I think it’s a fair statement to say that Tile Doctor have a product to treat every problem and to remove the limescale I used Tile Doctor Grout Clean-Up which is an acid based product usually used to remove excess grout but it’s also effective on the removal of mineral deposits; needless to say it removed the limescale without a problem. You do have to be very careful when using strong products like these on tile so I only left it on the floor long enough to do the job.

The last step was to fit a brush head onto my rotary floor machine and gave the floor a thorough rinse neutralising the floor and making sure that all trace of cleaning products were removed. Once I had finished I locked up the house and left the floor to dry for several days.

Sealing Hallway Quarry Tiles

When I returned I first checked that the floor was dry enough to seal using a moisture meter. The floor was dry so we started the process of sealing the floor with Tile Doctor Seal and Go, the Quarry Tiles were very porous and it tool seven coats of sealer before the tiles were completely sealed. Seal and Go was chosen as the customer wanted liked the low sheen finish this sealer provides whilst also offering excellent stain protection.

Quarry Tile Cleaning After Quarry Tile Cleaning After

The owners were absolutely delighted with the results and they put in a fantastic review about me on the Tile Doctor website.

“Bill Bailey provided an extremely professional and high quality service from first point of contact to end result. He took time to assess the tiles to be cleaned and approached the job with a genuine commitment to get it right and achieve the best possible results. He carefully explained all the processes involved and was able to answer all our questions and provide advice. We would not hesitate to recommend him very highly. Gemma, London”

Quarry Tile Cleaning Before and After
 

Quarry Tile Renovation in Grove Park, South London

Quarry tiled floor restoration in Grove Park, South London Read More »

╳
Scroll to Top