slate tile Archives - South London Tile Doctor

Applying Anti Slip to Shiny Slippery Porcelain Tiles in Ashtead

Applying Ant-Slip to a shiny Porcelain Patio

Last week we were asked to carry out a demonstration of our AntiSlip Treatment for a lady in Ashtead Surrey. She has white shiny Porcelain tiles laid on a patio area and when they get wet they are really slippery and dangerous and she was especially concerned about young children hurting themselves. We carried out a test patch for her and asked her to see if she could slip, not only did she try, but her gran and mother-in-law also tried and were extremely impressed. I left her with our quotation so she could discuss it with her husband. The next day I received a call asking me to go ahead and carry out the works.

Applying the Anti-Slip Solution

When applying this treatment it is vital that you follow all the guidelines and times for the different types of stone. It is a 3 stage application, the first is the primer which is mixed 4 : 1 which we scrubbed into small areas of about 6m2 at a time, when scrubbing we used a brush head on our rotary scrubbing machine which has the added advantage of cleaning the tiles.

Shiny Slippery Porcelain Tiles in Ashtead26

After about 5 minutes of scrubbing using a scrubbing pad we then vacuumed it all and left the tiles to dry and because we were outside in the sun it didn’t take long to dry. The next stage is to apply the Antislip treatment and for this we used a flat mop and for these type of tiles we needed to leave it to dwell for between 3 and 5 minutes, but we had to make sure that it did not dry in.

After the dwell time the 3rd stage is to scrub in another solution of the primer, but this time it locks in the Antislip. When you are scrubbing this stage you can feel the treatment working. Once we have completed this stage we vacuum it all up then rinse the area with fresh water to remove any residues.

Applying Anti Slip to Shiny Slippery Porcelain Tiles in Ashtead33

The complete area was around 50m2 and luckily the treatment package covered this area. In all the application took two of us around five hours to complete and after clearing our equipment away we then put all the garden furniture back in place.

We returned the next day because the customer also asked us to clean their driveway and the patio area was wet because of rain, but it was great to walk on and I did not slip at all.

Shiny Slippery Porcelain Tiles in Ashtead41

The customer was really happy, because if the treatment hadn’t worked her only other option would have been to rip up the tiles and replace them at a cost of thousands and to make things even better for her, this treatment will last around 4 years before she needs to have it re-applied.

Preventing slips and trips on shiny porcelain patio tiles

Applying Ant-Slip to a shiny Porcelain Patio Read More »

Balham Slate Floor Before After Cleaning

Slate Tiled Floor restored to a natural finish in Balham, South London

1 Comment / Battersea Tile Cleaning, Slate Tile Cleaning, Work History / Daniel

This beautiful slate tiled floor installed in the kitchen and hallway of a house in Balham London; I was asked by the owner if we could restore the floor following some work that had been carried out by a builder who had failed in his attempts to remove the old seal. To instill confidence that we could complete the work we carried out a demonstration on a small test area which was enough to prove that money would not be wasted and we were booked for the job, we even agreed to clean the floor on Sunday and seal it on the Monday so it would be ready in time for visitors who were due on the Wednesday.

Cleaning slate Floor Tiles

We cleaned the floor using Tile Doctor Pro-clean which is an alkaline cleaner safe to use on natural stone such as Slate; it’s very good at removing general dirt, grime and even grease. Next step was to remove the remaining sealer using Tile doctor Remove & Go which was applied to a small area at a time. I scrubbed the product into the slate and left it on the surface for a further hour making sure not to let the area dry out which temporarily made it look really dark (see photo below). Finally I gave the floor a through rinse to make sure that no chemical remained on the stone before sealing and then left for the evening.

Sealing Slate Floor Tiles

The next day I checked the floor was dry using a moister meter which thankfully it was and then started to seal using two coats of Tile Doctor Colour Grow which is a colour enhancing sealer design to provide maximum stain protection on natural stone floors whilst bringing out the deep colour in the stone and providing a natural matt finish.

My customer was really happy with the results and left a nice testimonial on the Tile Doctor website, she has also booked me in to clean her driveway next month.

Slate Floor Cleaned, Stripped and Re-Sealed in Balham, South London

Slate Tiled Floor restored to a natural finish in Balham, South London Read More »

Slate Floor Cleaning at a Central London Office

Battersea Tile Cleaning, Grout Cleaning, Slate Tile Cleaning, Work History / Daniel

I was asked by a building company to look at some slate flooring that was laid during a refurbishment to the offices of a German television station based in central London.
The architect was not happy because there appeared to be some grout haze and some grout along the ridges that you get in slate. I carried out a demonstration to the building manager and she was pleased with the result and we were awarded the job.

Because of the nature of the business I had to do the job out of hours, which suited me because there were 4 toilet areas to do over 6 floors and I was able to get on with the job without any interruption.

Slate Tile Cleaning

On my arrival I laid a coating of Tile Doctor Remove and Go mixed 50/50 with NanoTech Ultra-Clean to 2 toilets and left it to dwell while I brought all my equipment in and set up. These two products together create a very powerful stripper cleaning solution ideal for the job in hand. I left the products to soak into the tiled slate floor of the first toilet for an hour before scrubbing it in using water and a hand scrubbing brush. The soiled solution was then removed using a wet vacuum and then rinsed and sprayed with Tile Doctor Grout Clean-Up to remove any remaining grout haze off the surface of the tile. The slate was the given two mores rinses with clean water before being left to dry.

Before starting on the next floor I left a mixture of Remove and Go and NanoTech Ultra-Clean to dwell on the next floor. I then carried on with this process described above until all the floors were cleaned.

Slate Tile Sealing

Once the floors were dry I put a single coat of Tile Doctor Colour Grow sealer down on each floor which is a sealer which really brings out the natural colour of the stone.
The client had requested a shiny final finish so the sealing was completed using two coats of Tile Doctor Seal and Go on each floor.

When I had finished the site manager said that he couldn’t believe how nice they had come out and was looking forward to the reaction of the clients.

Cleaning and Sealing Slate in Central London Office

Slate Floor Cleaning at a Central London Office Read More »