shower tiles Archives - South London Tile Doctor

Limestone Floor Before and After Burnishing Wandsworth

Limestone Kitchen Floor and Shower Tiles Refinished in Wandsworth

Sometimes, Tile Doctor customers will have more than one tiled area in need of professional maintenance. At this house in Wandsworth, South London; I was commissioned to clean and seal firstly a Limestone tiled kitchen floor, and a Limestone tiled shower unit.

Limestone Floor Before Cleaning Wandsworth

Cleaning and Sealing a Limestone Kitchen Floor

I started with the Limestone tiled kitchen floor which, like many other stone floors had not been treated to the correct regular care and had become dull and dirty over time as a result.

My first task involved applying Tile Doctor Remove & Go stripper in order to break down any old surface sealant and dirt. Then, I began the burnishing process, which essentially involves polishing with pads of varying grit. I started with a Medium 800 grit burnishing pad to provide an initial polish and grind away ingrained dirt, before refining this with a Fine 1500 grit pad to achieve a smooth surface. The burnishing pads are used in combination with a small amount of water.

Limestone Floor During Cleaning Wandsworth

After leaving the floor to dry for 24 hours, I sealed the tiles with Tile Doctor Colour Grow. This will provide durable surface protection for the future and also further accentuate the great natural shades in the Limestone. To add the finishing touches, I buffed the floor with a soft white buffing pad.

Limestone Floor After Burnishing Wandsworth

Cleaning and Sealing a Limestone Tiled Shower Unit

During the time it took for the Limestone tiled kitchen floor to dry, I set my sights on tackling the shower unit. The unit was suffering from a terrible amount of limescale, which would need to be removed using a set of hand held burnishing pads. Limescale deposits build up on surfaces which come into contact with hard water, and can become very unsightly if not dealt with promptly.

Limestone Shower Tiles Before Cleaning Wandsworth

This proved to be a more awkward job thanks to the intricate Limestone fittings on the shower walls. I used the smaller 6-inch burnishing pads fitted to a hand buffer, while for the kitchen floor I naturally used the larger sized pads attached to a heavy weight buffing machine.

With the limescale as bad as it was, I started to grind it off with a Very Coarse 120 grit burnishing pad, before working my way up gradually through the system of pads – each time using a slightly finer grit pad until I finished with the Ultra Fine 3000 grit pad and the surface finish had been restored.

Limestone Shower Tiles After Cleaning Wandsworth

Following this, I removed the silicone sealant around the shower fittings, and dealt with the mould growing behind it.

On the second day of work, I sealed both the kitchen floor and the shower unit. Much like the kitchen floor, the shower unit was sealed using Colour Grow to ensure long lasting protection, and fresh silicon was also fitted.

Two days of work and two rejuvenated Limestone features later, I was left with a very happy customer.

Limestone Shower Tiles Before and After Cleaning Wandsworth

Restoring the appearance of a Limestone Kitchen Floor and Shower in South London

Limestone Kitchen Floor and Shower Tiles Refinished in Wandsworth Read More »

Tiled Shower Clean and Seal in Caterham

Shower problems must be the most common problem we come across at Tile Doctor where we often here of issues with discoloured shower tile and grout usually combined with a build up of mould. Discolouration problems tend to come from the dyes in bathroom products such as body washes and shampoo, where as mould is due to inadequate ventilation or extraction magnified by our cold damp climate as we keep the windows shut and increase insulation to reduce drafts and keep warm.

Removing Mould and Discolouration from Shower Grout

The photographs shown on this page come from a ceramic tiled shower cubicle in the Surrey town of Caterham which you may have heard of as it’s where they make the Caterham Sports Car. You should be able to see from the photographs areas of discoloration and mould on the grout and silicone sealant which unlike the glazed ceramic tiles are slightly porous and have allowed the dyes and mould to taken a hold.

To resolve the problems with the tile and grout a strong solution of Tile Doctor Pro-Clean was mixed in a spray bottle and then sprayed on; mixing the product with air allows it to stick better onto the vertical surface otherwise gravity causes it to run off. The Pro-Clean was allowed to dwell onto the surface for a few minutes before being worked in with a grout brush. The next step was to rinse the Pro-Clean down and then re-apply the process to areas which we had missed or needed further attention.

The tile was then left to dry before replacing the silicone sealant between the tile and shower tray; whilst Tile and Grout can normally be treated once mould gets a hold on the silicone the only thing you can do is to replace it. In some cases I’ve come across the grout becomes too stained to treat and in that case the only thing you can do is scrape the top layer of grout back using a screwdriver head sized to fit into the grout line.

Shower Grout Sealing

The last step was to seal the grout for which we used Tile Doctor Pro-Seal which is a penetrating sealer rather than one that sits in the surface. The sealer should prefect staining in future however given the location it will need to be re-applied more frequently than usual.