I was asked to clean and reseal this Honed Travertine flooring in Kensington, London which ran through the ground floor area and to a small area in the basement. The floor had been laid nine years prior and had only had regular washing by the housekeeper and was now overdue a deep clean and re-seal..
Deep Cleaning Travertine Tiles
It was a large area so it was necessary to work in sections which had the added complication of having to move the customer’s furniture around.
With each area I scrubbed the floor with a rotary machine fitted with a medium brush head and a hot 3:1 dilution of Tile Doctor Pro-Clean. I scrubbed it in and left it for 10 minutes before scrubbing again then vacuumed it away with a wet vac. I then checked all the grout lines were clean in case the brush head had missed any.
Next I fitted a pad holder to the rotary machine and using a medium grade burnishing pad scrubbed the area again, I then followed this up with the fine grade pad to build a nice sheen on the stone to match the customers’ requirements.
During the cleaning process it became evident that some of the Travertine tiles had holes in them, it’s possible they had been this way when supplied but it’s also possible that they had been worn through by the use of an acidic cleaning solution. so after once the tiles were cleaned and polished I filled in the holes with a matching filler.
Sealing Travertine Floor Tiles
The next step was to seal the Travertine to protect it from future staining and for this I used Tile Doctor Colour Grow which is a colour enhancing impregnating sealer that occupies the pores in the stone. In total I had to use three coats on sealer on the stone due to its porosity. I finally buffed the floor using a white soft buffing pad; this was to take off any seal left sitting on the surface of the stone and helps to work it in.
In total it took four days to do this job and the customer was really happy with the result and left a very nice testimonial on the Tile Doctor website.
Travertine Floor Cleaned, Polished and Sealed in Kensington
The photographs on the page come from a house in Kensington, London which had recently been decorated. The Limestone Tiled floor was already in need of clean however to make things worse the decorators had managed to get paint splashes on the floor which they had removed using white spirit, this resulted in a patchy appearance which you should be able to make out in the photo below:
Cleaning a Limestone Tiled Floor
To clean the floor we applied a solution of Tile Doctor Pro-Clean which is a heavy duty alkaline cleaning product specially designed for cleaning stone floors. This was left to dwell for a while and then agitated using a rotary machine fitted with a Black Scrubbing pad. The soiled solution was then removed using a wet vacuum and the floor was then rinsed down with fresh clean water.
Limestone Tiled Floor Polishing
We used a set of diamond encrusted Twister Burnishing Pads fitted to a rotary buffing machine to polish the Limestone floor. These pads are ideal for restoring the shine on hard stone surfaces such as Limestone and Marble, the come in a set of four and you start with the Red pad together with plain water and this cuts through and removes surface grime and any surface seal. You then progress through one by one until you get to the final Green pad which provides a high polish.
Sealing Limestone Tiles
The floor was left to dry and I returned a couple of days later to seal it using two coats of Tile Doctor Colour Grow which is a colour intensifying sealer that brings out the colours in natural stone. I carried out a water test to the customer so they could see that the floor was fully sealed; this involves placing a drop of water on the surface of the tile after each coat has dried, if the water forms a bubble on the surface then its fully sealed. The last step was to give the floor a final buff with a rotary machine fitted with a white buffing pad.
Customer was extremely happy because she had never seen the floor so clean.
Limestone Tile Cleaning and Polishing in Kensington, London
We were asked to look a bathroom at a flat in Kensington by a property management company; the slate tiled floor was textured with lines and the stone was affected by a number of problems including limescale and grout haze which had been partly sealed in. The owner was at the property when I arrived and I was able to demonstrate how it was possible to remove the limescale and grout haze using Tile Doctor Grout Clean-up which is an acid based product and so was given instructions to complete the job.
Removing Limescale from Textured Slate
Armed with more quantities of Grout Clean-Up we were able to remove the limescale from the surface of the slate tile. The floor was then rinsed and then covered with Tile Doctor Remove and Go in order to remove the remaining sealer. We had to repeat this process twice in order to remove the grout haze that had been locked in under the sealer.
Sealing Textured Slate
After a thorough rinsing down to ensure no products remained on the floor we left it to dry and returned later to apply three coats of Tile Doctor Colour Grow which will provide future protection and as you can see from the photographs really helped to give the floors appearance..
I then explained how to clean the tiles going forward. She was extremely happy with the work carried out and also pleased with the management company for contacting us in the first place.