You may recall a job I wrote about earlier in the year concerning a Limestone tiled floor in Westminster well I’m please to say the owner of that property was so pleased with my workmanship that I was asked back to maintain the Marble tiled bathroom which included a sink unit.
Maintaining Marble Tiles
Normally with polished stone it’s necessary to burnish the floor however in this case the tiles were in good condition with no scratches in the polish, there were a few spots and marks on the tile that needed to come off and they had lost some shine however a full burnish would not be necessary.
To remove the spots and marks I treated them first with a solution of Tile Doctor Pro-Clean diluted 4:1 with hot water. I then scrubbed them using a red buffing pad on my rotary floor machine, which took the marks away from the stone. Next I used a medium burnishing pad with a little water and followed with the fine pad and finally the ultra-fine burnishing pad to restore the shine and polish. I offered to build-up a durable polish with Tile Doctor Shine Powder however the owner was happy with the finish that had been achieved.
Sealing Marble Tiles
Once the tiles were dry I sealed them using Tile Doctor Colour Grow which is an impregnating sealer which occupies the pores of the stone and also enhances its natural colours in the process.
Once the floor had been done I carried out the same process on the Marble sink unit using small six inch pads with a hand polisher. All went well and as you can see from the water bubble test in the photograph below the floor is now fully sealed however there is more work to be done elsewhere in the house and the owner has now booked me in to clean all of the carpets.
Marble Tile Cleaning and Polishing in Westminster, London
We were asked to look a bathroom at a flat in Kensington by a property management company; the slate tiled floor was textured with lines and the stone was affected by a number of problems including limescale and grout haze which had been partly sealed in. The owner was at the property when I arrived and I was able to demonstrate how it was possible to remove the limescale and grout haze using Tile Doctor Grout Clean-up which is an acid based product and so was given instructions to complete the job.
Removing Limescale from Textured Slate
Armed with more quantities of Grout Clean-Up we were able to remove the limescale from the surface of the slate tile. The floor was then rinsed and then covered with Tile Doctor Remove and Go in order to remove the remaining sealer. We had to repeat this process twice in order to remove the grout haze that had been locked in under the sealer.
Sealing Textured Slate
After a thorough rinsing down to ensure no products remained on the floor we left it to dry and returned later to apply three coats of Tile Doctor Colour Grow which will provide future protection and as you can see from the photographs really helped to give the floors appearance..
I then explained how to clean the tiles going forward. She was extremely happy with the work carried out and also pleased with the management company for contacting us in the first place.