This beautiful slate tiled floor installed in the kitchen and hallway of a house in Balham London; I was asked by the owner if we could restore the floor following some work that had been carried out by a builder who had failed in his attempts to remove the old seal. To instill confidence that we could complete the work we carried out a demonstration on a small test area which was enough to prove that money would not be wasted and we were booked for the job, we even agreed to clean the floor on Sunday and seal it on the Monday so it would be ready in time for visitors who were due on the Wednesday.
Cleaning slate Floor Tiles
We cleaned the floor using Tile Doctor Pro-clean which is an alkaline cleaner safe to use on natural stone such as Slate; it’s very good at removing general dirt, grime and even grease. Next step was to remove the remaining sealer using Tile doctor Remove & Go which was applied to a small area at a time. I scrubbed the product into the slate and left it on the surface for a further hour making sure not to let the area dry out which temporarily made it look really dark (see photo below). Finally I gave the floor a through rinse to make sure that no chemical remained on the stone before sealing and then left for the evening.
Sealing Slate Floor Tiles
The next day I checked the floor was dry using a moister meter which thankfully it was and then started to seal using two coats of Tile Doctor Colour Grow which is a colour enhancing sealer design to provide maximum stain protection on natural stone floors whilst bringing out the deep colour in the stone and providing a natural matt finish.