Grout Cleaning

Removing Limescale from Porcelain Swimming Pool tiles in Oxshott

The owner of this swimming pool at a large residence in the suburban village of Oxshott had put the property on the market and naturally wanted the pool area to look its best. The pool was surrounded by Porcelain tiles which are very resilient and generally a good choice for a swimming pool surround, additionally the slate effect tiles in this post had a riven surface which would make them less slippery than the highly polished variety. The chemicals used in swimming pools however are quite strong and I suspect this has contributed to the build-up of Limescale on the surface of the tiles.

Cleaning Porcelain Tiles

The first job was to give the tiles a deep clean and this was done by scrubbing in Tile Doctor Pro-Clean diluted 1 part cleaner to four parts hot water using a black scrubbing pad fitted to a rotary machine. Once scrubbed the soiled cleaning solution was removed using a wet vacuum and the tiles given a thorough rinse. There were a lot of tiles to clean and naturally care has to be taken to avoid getting any cleaning solution in the pool.

Porcelain Pool Surround Oxshott Before Cleaning Porcelain Pool Surround Oxshott Before Cleaning

After rinsing the tiles were dried with the assistance of an air mover so we could get an idea of what other remedial work would be required and in this case it became clear where the areas with Limescale staining were.

Porcelain Pool Surround Oxshott During Cleaning

Removing Limescale from Porcelain Tiles

To remove the Limescale each stain was spot treated using Tile Doctor Grout Clean-up which is a strong acid based cleaning product normally used to remove grout smears from tiles but also equally useful at dealing with mineral deposits such as Limescale. You have to be very careful with acids on tiles, especially natural stone so once it had done its job the tiles were thoroughly rinsed and the whole floor rinsed again once we have completed everything.

Porcelain Pool Surround Oxshott After Cleaning Porcelain Pool Surround Oxshott After Cleaning

When we had finished the client couldn’t believe the transformation we have managed to achieve.

Porcelain Pool Surround Oxshott Before And After
 

Deep cleaning Porcelain pool surround tiles in OxShott, Surrey

Marble Tiled Hallway Cleaned and Polished in Farnborough

It’s not our local area but following a recommendation to this client by another customer we were asked to have clean and seal these Marble tiles in the hallway of a house in Farnborough.

Marble Tile Cleaning and Polishing

There was no sealer present on the Marble tiled floor so gave the floor a clean with a dilution of Tile Doctor Pro-Clean which is safe to use on stone floors, Pro-Clean is also very effective on grout so we took the opportunity to get into the grout lines as well. Once we were happy with the tile and grout we removed the soiled cleaning solution using a wet vacuum and washed the floor down with clean water.

The next step was to use a set of diamond encrusted burnishing Pads fitted to a rotary buffing machine to polish the floor. The pads come in a set and are very effective at restoring the shine back on Marble, Limestone and Travertine etc.

Marble Tiled Hallway Farnborough

Sealing Marble Tiles

Once the floor was polished we applied two coats of Tile Doctor Ultra-Seal which provides a high level of surface protection whilst maintaining the natural look of the Marble tiles. Once the sealer had dried we buffed the floor again using a white polishing pad.

Marble Tiled Hallway Farnborough2
I’m, afraid I forgot to take any photographs before we started cleaning so you can see the difference we made to the floor, needless to say however the customer was very happy with the results

Marble Floor Tiles and Grout Refreshed in Farnborough

Quarry Tiled Kitchen Floor Cleaned in Leatherhead

Details below of a Quarry Tiled kitchen floor that were cleaned and sealed for a lady in Leatherhead. As you can see it was quite a large area and the quarry tiles were looking dull and tired, there was some staining to the grout.

Quarry Tile Cleaning Before

Cleaning Kitchen Quarry Tiles

A solution of Tile Doctor Pro-Clean was applied to the floor and left to soak for a short while before being scrubbed in with a rotary machine fitted with a black scrubbing pad. The grout also need attention, unfortunately we don’t have a machine that will get into the grout lines so this had to be manually scrubbed by hand using a grout brush, which as you can imagine took some time to do. The soiled cleaning solution was then removed using a wet vacuum and the floor thoroughly rinsed with water and then left to dry overnight.

Quarry Tile Cleaning Before Zoom Quarry Tile Cleaning After Zoom

Sealing Kitchen Quarry Tiles

When we returned the next day we could see there were some grout lines that we had missed the day before so we set about cleaning those up. Once we were happy with the floor it and it had managed to dry off we sealed the floor using six coats of Tile Doctor Seal and Go which provides surface stain protection to the quarry tile and grout and also leaves a nice deep low sheen on the tile surface. The lady was over the moon with the results and her husband was even happier because it meant he didn’t have to pay out for a new kitchen.

Quarry Tile Cleaning After
 

Cleaning a Quarry Tiled Kitchen Floor in Leatherhead

Slate Floor Cleaning at a Central London Office

I was asked by a building company to look at some slate flooring that was laid during a refurbishment to the offices of a German television station based in central London.
The architect was not happy because there appeared to be some grout haze and some grout along the ridges that you get in slate. I carried out a demonstration to the building manager and she was pleased with the result and we were awarded the job.

Because of the nature of the business I had to do the job out of hours, which suited me because there were 4 toilet areas to do over 6 floors and I was able to get on with the job without any interruption.

Central London Office Slate Before Central London Office Slate Before

Slate Tile Cleaning

On my arrival I laid a coating of Tile Doctor Remove and Go mixed 50/50 with NanoTech Ultra-Clean to 2 toilets and left it to dwell while I brought all my equipment in and set up. These two products together create a very powerful stripper cleaning solution ideal for the job in hand. I left the products to soak into the tiled slate floor of the first toilet for an hour before scrubbing it in using water and a hand scrubbing brush. The soiled solution was then removed using a wet vacuum and then rinsed and sprayed with Tile Doctor Grout Clean-Up to remove any remaining grout haze off the surface of the tile. The slate was the given two mores rinses with clean water before being left to dry.

Before starting on the next floor I left a mixture of Remove and Go and NanoTech Ultra-Clean to dwell on the next floor. I then carried on with this process described above until all the floors were cleaned.

Slate Tile Sealing

Once the floors were dry I put a single coat of Tile Doctor Colour Grow sealer down on each floor which is a sealer which really brings out the natural colour of the stone.
The client had requested a shiny final finish so the sealing was completed using two coats of Tile Doctor Seal and Go on each floor.

Central London Office Slate After Central London Office Slate After

When I had finished the site manager said that he couldn’t believe how nice they had come out and was looking forward to the reaction of the clients.

Cleaning and Sealing Slate in Central London Office

=================================

South London Tile Doctor

Scroll to top