The photos below are of a Quarry tiled floor situated in a small kitchen at a house in Purley. The quarry tiles were previously covered in laminate for about 30 years which had recently been removed. This left the floor in quite a state as you can see from the photograph below. The floor was stained with numerous deposits including paint and adhesive and some sort of wax covering which was all over the surface.
Cleaning a Quarry Tiled Kitchen Floor
Before cleaning I covered the entire kitchen in a drop cloth to protect the units from splashing, I normally remove the kick boards as part of this process however, in this case the bottom of the units were already siliconed to the tiles. This is good practice as otherwise the boards which are usually made of MDF can soak up the water used during cleaning and warp the boards.
Next, I tackled the staining, surface paint, adhesive and wax using a strong dilution of Tile Doctor Remove & Go combined with Tile Doctor Pro-Clean to make a double strength stripper and cleaner. This was applied to the tiles and grout, and then left to soak in for ten minutes. I used a floor scraper to dislodge the glue which had been softened by the solution and then removed using a wet vacuum. The next step was to scrub the floor with a carbide brush and a coarse 200-grit diamond pad using only water to lubricate the process.
Once this was done, I rinsed the floor with water and extracted the slurry with the wet vacuum and allowed it to dry.
Sealing a Quarry Tiled Kitchen Floor
Once the floor was dry, I returned to protect the tiles by applying Tile Doctor Colour Grow sealer. This is an impregnating sealer that works by soaking into the pores of the quarry tiles occupying the spaces within and thereby preventing dirt from becoming ingrained and making it much easier to clean. Tile Doctor Colour Grow also contains a colour enhancer that works well on Quarry tiles as it brings out the red colours in the tiles. Two coats of the sealer were applied allowing thirty minutes between coats.
I recommended the use of Tile Doctor Neutral Tile Cleaner for ongoing maintenance. This is a pH neutral product which is mild enough to use every day, gentle on the floor and will ensure the newly applied sealer will stay in place and the floor will continue to look great.
The result was transformational, and it certainly impressed my customer who left the following 5 star feedback.
The Tile Doctor Feedback system prompts customers to leave comments on the work completed by Tile Doctors around the country. This information is then used to ensure the quality of the service and also decides the winner of the coveted Annual Tile Doctor of the Year Award.