You may recall a job I wrote about earlier in the year concerning a Limestone tiled floor in Westminster well I’m please to say the owner of that property was so pleased with my workmanship that I was asked back to maintain the Marble tiled bathroom which included a sink unit.
Maintaining Marble Tiles
Normally with polished stone it’s necessary to burnish the floor however in this case the tiles were in good condition with no scratches in the polish, there were a few spots and marks on the tile that needed to come off and they had lost some shine however a full burnish would not be necessary.
To remove the spots and marks I treated them first with a solution of Tile Doctor Pro-Clean diluted 4:1 with hot water. I then scrubbed them using a red buffing pad on my rotary floor machine, which took the marks away from the stone. Next I used a medium burnishing pad with a little water and followed with the fine pad and finally the ultra-fine burnishing pad to restore the shine and polish. I offered to build-up a durable polish with Tile Doctor Shine Powder however the owner was happy with the finish that had been achieved.
Sealing Marble Tiles
Once the tiles were dry I sealed them using Tile Doctor Colour Grow which is an impregnating sealer which occupies the pores of the stone and also enhances its natural colours in the process.
Once the floor had been done I carried out the same process on the Marble sink unit using small six inch pads with a hand polisher. All went well and as you can see from the water bubble test in the photograph below the floor is now fully sealed however there is more work to be done elsewhere in the house and the owner has now booked me in to clean all of the carpets.
Marble Tile Cleaning and Polishing in Westminster, London
Details below of a Limestone Tiled Floor that I recently cleaned and sealed at a residence in Westminster in the heart of London. The tiles were not looking the best and after deciding to do something about the owner searched the internet for a solution saw my website and emailed to book me in 2 months before.
Cleaning a Limestone Tiled Floor
I arrived on site at the agreed time and decided to scrub the floor first using a hot 4:1 dilution of Tile Doctor Pro-Clean which is a heavy duty alkaline cleaning product specially designed for cleaning stone floors. This was left to dwell for a while and then agitated using a rotary machine fitted medium brush head. The soiled solution was then removed using a wet vacuum and the floor was then rinsed down with fresh clean water. Doing this removed a lot of dirt, that was ingrained in the stone, and by using the brush it got into the recesses of the grout, once I had done this the floor looked great but I could see it would still needed to be burnished to restore the original appearance.
Burnishing Limestone Floor Tiles
We used a set of diamond encrusted Burnishing Pads fitted to a rotary buffing machine to polish the Limestone floor. These pads are ideal for restoring the shine on hard stone surfaces such as Limestone, Travertine and Marble, the come in a set of four and you start with the Coarse pad together with plain water and this cuts through and removes surface grime and any surface seal. You then progress through the Medium, Fine and Superfine polishing pads one to achieve a high polish.
Sealing Limestone Tiles
The floor was left to dry and I returned a couple of days later to seal it using two coats of Tile Doctor Colour Grow which is a colour enhancing sealer that brings out the colours in natural stone, finally buffing the floor using a soft white buffing pad.
The lady was really pleased with the result and left a nice testimonial on the tiled doctor website, she has also booked me in to sort out two bathroom floors (one Marble and one Limestone) and she has also booked me in to carry out the cleaning of all her carpets.
Limestone Tile Cleaning and Polishing in Westminster, London