Beautiful Limestone tiled floor installed in the kitchen of a house in Fulham, the owner was keen to have the floor cleaned and re-polished; Limestone is a very hardwearing material but does need an occasional professional polish to keep it looking its best.
Cleaning Limestone Floor Tiles
The floor was given a quick wash with Tile Doctor Neutral Cleaner in order to remove any surface grit and then cleaned using a set of Burnishing pads fitted to a rotary machine. The burnishing pads come in four different colours and you work your way through them starting off with the red pad with a little just water and then carry on with the white pad and then the yellow pad until the floor is thoroughly cleaned. Next step was to use Tile Doctor Pro-Clean along the grout lines with a stiff brush to get the grout clean as well. To bring up the polish on the Limestone tiles I used a green polishing pad which is the last in the set of the four burnishing pads.
Sealing Limestone Floor Tiles
Once the floor was dry we set about sealing it using two coats of Tile Doctor Colour Grow which is a colour enhancing sealer designed to provide maximum stain protection on natural stone floors whilst bringing out the deep colour in the stone. The last step was to buff the floor to a nice shine with a rotary machine fitted with a white pad.
This job took me two days, and the owner was extremely happy with the results and said it looked better than when it had first been laid eight years ago.
Limestone Floor Cleaned, Polished and Sealed in Fulham
On a visit to a customer to a customer in Beckenham, Kent who had a pair of rugs that needed cleaning I was asked to take a look at her Encaustic kitchen floor tiles which had become dull and she couldn’t keep them clean. I carried out a demonstration on how I would clean them and also explained the different sealer options available and how each sealer can have a different effect. She was pleased with the demonstration and engaged me to clean the tiles as well as the rugs specifying a sealer that would leave a sheen on the tile.
Cleaning black Porcelain floor tiles
I set about scrubbing the floor using a hot water dilution of Tile Doctor Pro-Clean Tile and Grout cleaner combined 50:50 with NanoTech UltraClean which adds tiny abrasive particles to the solution to make a more effective cleaning product. The solution was worked into the tiles by scrubbing with a rotary machine fitted with a black scrubbing pad and a stiff hand brush was used along the tight grout lines. The soiled solution was removed using a wet vacuum and floor thoroughly rinsed down with clean water. The tiles were then left to dry with the aid of a Turbo Air blower to help speed up the drying time.
Sealing Encaustic Floor Tiles
Once the tiles were dry I applied five coats of Tile Doctor Seal and Go which is a water based protective sealer that doesn’t give off any odour and produces a nice low sheen the customer was looking for.
The final result was one happy customer with a clean easy to maintain tiled floor and two clean rugs as well.
Cleaning Encaustic floor Tiles in a Beckenham Kitchen