Black Limestone Floor installation problems resolved in Wimbledon

Black Limestone Before and After in Wimbledon

I was recently asked to this property in Wimbledon in to see if there was anything we could do to resolve the problem with a recently laid Black Limestone tiled floor. The builders that had laid the Limestone did not cover or clean the tiles prior to sealing with an impregnating seal thereby trapping in all the dirt from the building works. They then grouted the tiles but didn’t clean the grout off the surface before putting on another two coats of sealer all of which resulted in a very poor finish.

Black Limestone Tile Showing Trapped Dirt in Wimbledon
Naturally the customer was not happy so called them back to rectify the problem and so they came back and tried to strip the sealer off with cloths and a chemical stripper. Then without rinsing the stone to remove the chemicals they added another two coats of sealer; in desperation the lady gave up with them and called me in.

Black Limestone Tile Showing Trapped Dirt in Wimbledon

Stripping the Limestone Tiled Floor

To resolve I tried all the sealant strippers available to me but couldn’t budge the mess effectively. The only other option available was to diamond grind the surface so I discussed this with the customer and she agreed to this and left me to carry on.

Initially I started with a coarse 400 grit diamond pad but even that wasn’t having much effect so in the end I had to cut back the surface using a 100 grit pad moving up to 200 grit, then 400 before finally stopping at 800. To lubricate the process you need to use a little water and then rinse away the resultant soil after each pad. If this was a polished stone surface I would have continued with finer and finer grits to restore the surface polish however these tiles were rough limestone and I needed to leave it as near to how it should be.

Black Limestone Tile Grinded with Diamond Pads in Wimbledon
Once all the Limestone had been stripped back the stone turned an uninviting grey colour, so to bring it back to black I applied two coats of Tile Doctor Stone Oil which enhanced the colour.

Black Limestone Tile Adding Stone Oil in Wimbledon

Sealing Black Limestone Tiles

I left the floor overnight to allow the Stone Oil to dry out and then returned to seal the Limestone using two coats of Tile Doctor Colour Grow which is an impregnating sealer that enhances the colour in the stone and will protect it from staining going forward.

Black Limestone Grinded and sealed in Wimbledon
When the customer saw the final result she was overwhelmed and said she felt like crying with relief, because the floor now looked how she had imagined it to be. It was a great feeling for me to know that I had solved the problems for her.

Black Limestone Before and After in Wimbledon
 

Restoring Black Limestone Tiled Floor in Wimbledon

3 thoughts on “Black Limestone Floor installation problems resolved in Wimbledon”

  1. Sealers do breakdown over time depending on wear and tear and what products are used to clean the floor so if you do want to keep your stone floor looking its best you will need to top up the sealer at regular intervals.

Comments are closed.

Scroll to Top